We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader Cat6a Ethernet Cable 100ft 10G 500MHz 24AWG Gray

SKU CH-V49J-7G1E2

A 100 ft Cat6a patch cable delivering 10 Gigabit speeds at 500 MHz over bare copper for long, stable wired runs

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length100 ft.
  • ColorGray

Length 100ft

Show 9 more configurations
  • 10 Gbps wired speed over 100 ft at 500 MHz
  • 24 AWG bare copper with cross-spline for signal integrity
  • 50-micron gold RJ45 contacts and snagless boots resist wear
  • Backward compatible with Cat6 and Cat5e for drop-in use
  • UL & ETL verified, RoHS compliant for safe installs

Cable Leader 100ft Cat6a Patch Cable

The Cable Leader 100ft Cat6a Ethernet Cable is a 10 Gigabit LAN patch cord built for long runs between rooms or floors. It uses 24AWG stranded bare copper conductors in a UTP design with a 6.9mm outer diameter and cross-spline core. The cable terminates in 8P8C RJ45 connectors with 50-micron gold-plated contacts and snagless molded boots. It is RoHS compliant and UL & ETL Verified for safety.

500MHz bandwidth and 10GBASE-T headroom

Rated at 500MHz, the cable supports 10GBASE-T speeds up to 100 metres, giving full headroom for the 100ft length supplied. It handles 10 Gigabit traffic from routers, switches, access points, NAS units and gaming consoles without the drops common on wireless links. Backward compatibility with Cat6 and Cat5e lets it drop into existing networks. The unshielded construction means it is not suited for environments with heavy electromagnetic interference.

Drop-in upgrade from Cat5e or Cat6

This cable replaces older Cat5e or Cat6 patch cords when 10 Gigabit throughput is needed over longer distances. The jump is worth it for installers pulling cable through walls or across ceilings where the 500MHz rating and cross-spline core protect signal integrity. It is not for buyers who need shielded cable for noisy industrial sites or outdoor burial-rated jacket.

Highlights

  • 10 Gbps wired speed over 100 ft at 500 MHz
  • 24 AWG bare copper with cross-spline for signal integrity
  • 50-micron gold RJ45 contacts and snagless boots resist wear
  • Backward compatible with Cat6 and Cat5e for drop-in use
  • UL & ETL verified, RoHS compliant for safe installs

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length100 ft.
ColorGray
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 100ft Cat6a cable run at 10 Gigabit speeds alongside my existing Cat6 patch cables?

Yes. The cable is rated for 10GBASE-T up to 100m at 500MHz and is fully backward compatible with Cat6 and Cat5e, so it will negotiate the highest speed both ends support.

How can I verify the 500MHz Cat6a link is active after I plug it into my router and switch?

Check the port LEDs on both devices; a solid or blinking amber light typically indicates a 10G connection, and your OS network status should report a 10 Gbps link speed.

Does the 100ft gray cable come with both RJ45 ends fitted, or do I need to buy connectors separately?

Both ends are factory-terminated with 8P8C RJ45 plugs featuring 50-micron gold-plated contacts and snagless molded boots, so no extra connectors are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.