We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 30ft Cat6a Ethernet cable with RJ45 connectors and snagless boots

Cable Leader

Cable Leader 30ft Cat6a Network Ethernet Cable Blue 24AWG

SKU CH-54DK-QCQ9X

A 30 ft Cat6a patch cable rated for 10 Gigabit at 500 MHz with 24 AWG stranded copper, gold-plated RJ45 connectors and a snagless boot

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length30 ft.
  • ColorBlue

Length 30ft

Show 9 more configurations

Color Blue

  • 10 Gbps wired speed over 100 m at 500 MHz
  • 24 AWG stranded bare copper with cross-spline core reduces crosstalk
  • 50-micron gold-plated RJ45 contacts resist corrosion for reliable signal
  • Snagless molded boots protect locking clips during routing and install
  • Backward compatible with Cat6 and Cat5e for drop-in upgrade

30ft Cat6a cable for wired gaming and networking

This 30ft Cat6a Ethernet cable provides a 10 Gigabit wired link for PS5, Xbox, gaming PC or office network gear. It meets the Cat6a standard at 500MHz and runs 10GBASE-T up to 100 meters while staying fully backward compatible with Cat6 and Cat5e equipment.

Passive copper construction runs cool and silent

With no active components the cable draws no power, generates no heat and adds zero noise to the installation. The 24AWG stranded bare copper conductors and 6.9mm outer diameter keep signal loss low across the full length without needing a fan or external supply.

Snagless RJ45 ends fit standard ports

Each end uses an 8P8C RJ45 plug with 50-micron gold-plated contacts and a molded snagless boot that protects the locking clip during pulls. The UTP design works with routers, switches, PoE injectors, NAS units, smart TVs and patch panels, while the flexible jacket eases routing through walls, conduit or cable trays.

Highlights

  • 10 Gbps wired speed over 100 m at 500 MHz
  • 24 AWG stranded bare copper with cross-spline core reduces crosstalk
  • 50-micron gold-plated RJ45 contacts resist corrosion for reliable signal
  • Snagless molded boots protect locking clips during routing and install
  • Backward compatible with Cat6 and Cat5e for drop-in upgrade

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length30 ft.
ColorBlue
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I route the 6.9 mm cable through a tight conduit and what step do people miss?

Feed the snagless boot first so the locking clip cannot catch on edges; the stranded 24 AWG pairs flex easily but the cross-spline keeps the 6.9 mm diameter rigid, so avoid sharp bends tighter than four times the cable diameter.

What will wear out first and need replacement on this cable?

The 50-micron gold-plated RJ45 contacts and the molded PVC boot are the only serviceable parts; if the clip snaps or the contacts corrode after years of PoE cycles, replace the entire 30 ft patch cord rather than re-terminating stranded conductors.

At what point does sustained 10 Gbps traffic hit a hard limit on this run?

The Cat6a specification guarantees 10GBASE-T up to 100 m at 500 MHz; your 30 ft length is well inside that envelope, so the first limit you meet will be the switch or NIC port speed, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.