We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 100ft Cat6a UTP cable with RJ45 connectors and snagless boots

Cable Leader

Cable Leader Cat6a 100ft 24AWG Yellow UTP network ethernet cable

SKU CH-E3ME-VBECH

A 100ft Cat6a UTP patch cable delivering 10GBASE-T at 500MHz over 24AWG bare copper with gold-plated RJ45 connectors and snagless boots

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length100 ft.
  • ColorYellow

Length 100ft

Show 9 more configurations

Color Yellow

  • Supports 10GBASE-T at 500 MHz for 10 Gigabit speeds
  • 100 ft length enables long runs between rooms or floors
  • 24 AWG stranded bare copper with cross-spline core reduces crosstalk
  • 50-micron gold-plated RJ45 contacts and snagless boots ensure durable connections
  • Backward compatible with Cat6 and Cat5e for a drop-in upgrade

100ft Cat6a patch cable for 10GBASE-T runs

This 100 foot Cat6a UTP cable carries 10 Gigabit Ethernet up to the full 100 metre channel limit at 500 MHz. Stranded 24 AWG bare copper conductors and a cross-spline core keep crosstalk low on long pulls between floors or across offices. Gold-plated RJ45 contacts and snagless boots survive repeated patching.

Thermals noise and power draw in normal use

Passive copper construction adds no heat, no fan noise and no power draw to the link. The 6.9 mm jacket routes through trunking or under carpet without crushing, and the snagless boot protects the clip during moves. Signal integrity stays within Cat6a limits without active components.

Replaces Cat5e or Cat6 links that cannot reach

Swapping an older patch cable for this Cat6a run unlocks 10 Gigabit speeds where the previous cable capped at 1 Gigabit. The jump is worth it when the switch, router and NIC already support 10GBASE-T but the installed cabling does not. Not for buyers who need shielded cable for high-EMI environments or runs beyond 100 metres.

Highlights

  • Supports 10GBASE-T at 500 MHz for 10 Gigabit speeds
  • 100 ft length enables long runs between rooms or floors
  • 24 AWG stranded bare copper with cross-spline core reduces crosstalk
  • 50-micron gold-plated RJ45 contacts and snagless boots ensure durable connections
  • Backward compatible with Cat6 and Cat5e for a drop-in upgrade

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length100 ft.
ColorYellow
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I run the 6.9mm cable through walls without damaging the 24AWG conductors?

Keep bends gentle — no tighter than four times the 6.9mm outer diameter — and pull slowly with a lubricated fish tape so the stranded copper pairs and cross-spline stay intact.

When should I replace this 100ft Cat6a patch cable?

Replace it if the snagless boot cracks, the gold-plated contacts discolour, or a cable tester shows insertion-loss failures on any of the four twisted pairs.

At what distance does 10GBASE-T performance drop below spec on this cable?

The Cat6a standard guarantees 10GBASE-T up to 100 metres at 500MHz; beyond that length the signal margin erodes and errors rise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.