We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green Cat6a Ethernet cable 100ft with RJ45 connectors and snagless boots

Cable Leader

Cable Leader Cat6a Ethernet Cable 100ft Green 24AWG 500MHz

SKU CH-HNTZ-JGJG0

A 100 ft Cat6a patch cable rated for 10 Gigabit at 500 MHz with 24 AWG bare copper and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length100 ft.
  • ColorGreen

Length 100ft

Show 9 more configurations

Color Green

  • 10 Gigabit wired speed with 500 MHz Cat6a bandwidth
  • 100 ft reach for long runs between rooms or floors
  • 24 AWG stranded bare copper with cross-spline core reduces crosstalk
  • 50-micron gold-plated RJ45 contacts and snagless boots ensure durable connections
  • Backward compatible with Cat6 and Cat5e for a drop-in upgrade

100ft Cat6a cable for long runs

This 100ft Cat6a Ethernet cable provides a 10 Gigabit wired link for home and office networks. It uses 24AWG stranded bare copper conductors in a 4-pair cross-spline design with a 6.9mm outer diameter. Gold-plated RJ45 contacts and snagless boots ensure a reliable connection. The green jacket makes it easy to identify in a crowded rack or conduit.

Drop-in upgrade from Cat5e or Cat6

The cable supports 10GBASE-T up to 100m at 500MHz on the Cat6a standard. It is fully backward compatible with Cat6 and Cat5e hardware, so it replaces older patch leads without changing routers, switches or network cards. The jump is worth it when you need stable 10 Gigabit throughput over longer distances where Wi-Fi drops out or lower-category cables cannot guarantee the bandwidth.

Verify connector space and route length

Check that your wall plates, patch panels or device ports have enough clearance for the 6.9mm cable diameter and the molded snagless boots. Confirm the 100ft length matches the exact run between your router, switch, access point or smart TV to avoid excess slack or a shortfall. Ensure your existing equipment supports the speeds you intend to use.

Highlights

  • 10 Gigabit wired speed with 500 MHz Cat6a bandwidth
  • 100 ft reach for long runs between rooms or floors
  • 24 AWG stranded bare copper with cross-spline core reduces crosstalk
  • 50-micron gold-plated RJ45 contacts and snagless boots ensure durable connections
  • Backward compatible with Cat6 and Cat5e for a drop-in upgrade

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length100 ft.
ColorGreen
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What outer diameter does the 6.9 mm cable need to clear when routing through walls or conduit?

The cable has a 6.9 mm outer diameter, so any drilled hole, grommet or conduit must provide at least that much clearance for a smooth pull.

How should the snagless boot be handled when inserting the RJ45 plug so the locking tab clicks securely?

Push the connector straight in until the tab clicks; the molded snagless boot protects the clip but does not replace the need to seat the plug fully.

When should the 24 AWG stranded copper patch cable be inspected or replaced in a permanent installation?

Check the boot and connector for cracks or looseness after any remodel or if link errors appear; replace the patch cable if the gold-plated contacts show corrosion or the jacket is damaged.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.