We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 100ft Cat6a ethernet cable with RJ45 connectors and snagless boots

Cable Leader

Cable Leader 100ft Cat6a network ethernet cable White 24AWG

SKU CH-XW3V-WR94B

A 100 ft Cat6a patch cable delivering 10 Gigabit speeds at 500 MHz over 24 AWG bare copper with gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length100 ft.
  • ColorWhite

Length 100ft

Show 9 more configurations

Color White

  • Supports 10GBASE-T up to 100 metres at 500MHz
  • 100ft length enables long runs between rooms or floors
  • 24AWG stranded bare copper with cross-spline core for signal integrity
  • 50-micron gold-plated RJ45 contacts with snagless molded boot
  • Backward compatible with Cat6 and Cat5e for drop-in upgrade

100 ft Cat6a patch cable

This 100 ft Cat6a patch cable uses 24 AWG stranded bare copper conductors and RJ45 connectors to carry 10 Gigabit Ethernet over a single run. It is intended for installers and home users who need a long, wired link between rooms or floors where wireless coverage is weak.

Thermals noise and power draw

As a passive copper cable it generates no heat, draws no power and produces no audible noise during normal operation. The 6.9 mm outer diameter and cross-spline core maintain signal integrity without active components or cooling requirements.

Gold contacts and snagless boots

The 50 micron gold-plated contacts resist corrosion for reliable mating cycles, while the snagless molded boots protect the locking clips from damage during routing. These features reduce installation failures and maintain performance on PoE injectors, switches, routers, consoles, NAS units and smart TVs.

Highlights

  • Supports 10GBASE-T up to 100 metres at 500MHz
  • 100ft length enables long runs between rooms or floors
  • 24AWG stranded bare copper with cross-spline core for signal integrity
  • 50-micron gold-plated RJ45 contacts with snagless molded boot
  • Backward compatible with Cat6 and Cat5e for drop-in upgrade

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length100 ft.
ColorWhite
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 100ft Cat6a cable and what step causes connection faults?

Route the 6.9mm cable to the device, press each RJ45 plug until the clip clicks, and keep the pair twists right up to the connector; untwisting too far at the jack is the step that creates return-loss failures.

What maintenance or replacement will the cable need later?

The 50-micron gold-plated RJ45 contacts and snagless molded boots are rated for the life of the install; only physical damage — crushed jacket, kinked pairs or a broken clip — would require a new 100ft run.

What limit appears first when the link runs at 10GBASE-T continuously?

The 500MHz Cat6a channel limit governs sustained 10 Gigabit throughput; as long as the 100ft length stays within the 100m standard, the cable itself does not impose a lower ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.