We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short white Cat6a patch cable with snagless RJ45 connectors on both ends

Cable Leader

Cable Leader Cat6a Ethernet Cable 1ft 24AWG White

SKU CH-TNY5-NY5VD

A 1 ft Cat6a patch cable delivers 10 Gigabit wired networking at 500 MHz with 24 AWG bare copper conductors and gold-plated RJ45 contacts

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length1 ft.
  • ColorWhite

Length 1ft

Show 9 more configurations

Color White

  • 10 Gigabit wired speed at 500 MHz for lag-free gaming
  • 24 AWG bare copper with cross-spline core cuts crosstalk
  • 50-micron gold RJ45 contacts resist corrosion and signal loss
  • Snagless molded boot protects the clip and prevents tangles
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Short 1ft Cat6a patch cable for tidy desk

This 1ft Cat6a Ethernet cable delivers a 10 Gigabit wired link for gaming PCs, PS5, Xbox or any router and switch. The short length keeps cable management clean on a desk, behind a console or inside a rack. It drops straight into existing Cat6 or Cat5e infrastructure with no equipment changes.

Passive copper construction runs cool and silent

The cable has no active components, so it adds zero heat and no audible noise to the installation. Power draw is limited to the PoE current carried for connected devices, not the cable itself. The 24AWG stranded bare copper conductors and 500MHz rated design maintain signal integrity across the full 100 metre channel allowance.

Snagless boots and cross-spline core survive daily

Each end uses 50-micron gold-plated RJ45 contacts inside a molded snagless boot that protects the locking clip during frequent plugging. The 4-pair cross-spline core holds a 6.9mm outer diameter, giving a firm but flexible feel that resists kinking when routed around corners or through cable trays. RoHS compliant and UL & ETL Verified.

Highlights

  • 10 Gigabit wired speed at 500 MHz for lag-free gaming
  • 24 AWG bare copper with cross-spline core cuts crosstalk
  • 50-micron gold RJ45 contacts resist corrosion and signal loss
  • Snagless molded boot protects the clip and prevents tangles
  • Backward compatible with Cat6 and Cat5e for drop-in upgrades

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length1 ft.
ColorWhite
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 1ft Cat6a cable without damaging the locking clip?

The snagless molded PVC boot covers the RJ45 clip, so you can route the 6.9 mm cable through tight spaces and push the connector in until it clicks without the clip catching on other cords.

Will the 50-micron gold-plated contacts need cleaning or replacement over time?

The gold plating resists oxidation, so the contacts do not require periodic cleaning; the cable itself has no moving parts and is rated for the life of the installation.

At what point does the 500 MHz bandwidth limit appear during sustained 10 Gbps traffic?

The Cat6a standard guarantees 10GBASE-T performance up to 100 m at 500 MHz, so the 1 ft length stays well within that limit even under continuous load.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.