We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 adapter cable with 44-pin IDE, 40-pin IDE and SATA connectors

weastlinks

weastlinks USB 2.0 to IDE SATA adapter cable 2.5 3.5 inch

SKU CH-GWC3-ZTF5K

Connects 2.5 and 3.5 inch IDE or SATA drives via USB 2.0 with 40 and 44 pin connectors

  • ColorBlack
  • Connect 2.5 inch IDE drives via 44-pin interface
  • Connect 3.5 inch IDE drives via 40-pin interface
  • Connect SATA drives with dedicated SATA connector
  • USB 2.0 plug-and-play for quick setup
  • External AC power input 90v-264v powers drives

Adapter purpose

This USB 2.0 adapter connects 2.5 and 3.5 inch IDE or SATA drives to a computer for data recovery or archiving. It suits technicians and hobbyists who need to access legacy hard disks or optical drives without installing them internally. The cable provides three separate connectors for different drive interfaces.

Power and operation

The adapter requires an external AC power supply with an input range of 90v to 264v to operate connected drives. Power is not included with the cable. The Hi-Speed USB interface enables plug and play installation without additional drivers for basic drive access.

Build integration

The cable adds a 44 pin IDE connector for 2.5 inch drives, a 40 pin IDE connector for optical drives and a SATA connector for SATA devices. It frees up internal drive bays and SATA ports by moving drive connections outside the chassis. An external power brick must be sourced separately to complete the setup.

Highlights

  • Connect 2.5 inch IDE drives via 44-pin interface
  • Connect 3.5 inch IDE drives via 40-pin interface
  • Connect SATA drives with dedicated SATA connector
  • USB 2.0 plug-and-play for quick setup
  • External AC power input 90v-264v powers drives

Specifications

ColorBlack

Questions about this item

How do I connect the 40-pin IDE, 44-pin IDE and SATA plugs to my 3.5-inch drive and what step is often missed?

Attach the correct connector — 40-pin for desktop drives, 44-pin for 2.5-inch units, or SATA for SATA devices — then connect the external AC power adapter (90 V-264 V input, not included) before plugging the USB 2.0 cable into the computer.

What part will need replacement first during long-term use?

The external AC power adapter (90 V-264 V input) is not included and is the most likely item to require replacement if it fails or is lost.

What speed limit appears first when copying large files continuously?

The USB 2.0 interface sets the maximum transfer rate, so sustained copies will hit that bus ceiling before the drive’s own performance becomes a factor.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.