We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 75ft Cat6a Ethernet patch cable with RJ45 connectors

Cable Leader

Cable Leader 75ft Cat6a Network Ethernet Cable Blue 24AWG 500MHz 10GBASE-T

SKU CH-TD5S-JT2D0

A 75 ft Cat6a patch cable rated for 10 Gigabit Ethernet at 500 MHz with 24 AWG bare copper conductors and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length75 ft.
  • ColorBlue

Length 75ft

Show 9 more configurations

Color Blue

  • 10 Gbps wired speed over 75 ft at 500 MHz
  • Cat6a standard works with existing Cat6 and Cat5e gear
  • 24 AWG bare copper with cross-spline core keeps signal clean
  • Gold-plated contacts and snagless boots survive repeated plugging
  • 100 m reach certified by UL and ETL for long runs

75 ft Cat6a 10 Gigabit Patch Cable

This 75 foot Cat6a Ethernet cable provides a 10 Gigabit wired link for home and office networks. It uses 24 AWG stranded bare copper conductors in a 4 pair cross spline core with a 6.9 mm outer diameter. Gold plated RJ45 contacts and snagless molded boots protect the connection during installation. The cable is RoHS compliant and UL ETL Verified.

Upgrade From Cat5e or Cat6 For 10GBASE-T

Replacing Cat5e or Cat6 with this Cat6a cable enables 10GBASE-T speeds up to 100 metres at 500 MHz. The jump is worth it when you need full 10 Gigabit throughput over long runs between rooms or floors where older cables would limit bandwidth. Backward compatibility means it works with existing routers switches and devices without hardware changes.

Installers Needing Reliable Long Runs

This cable suits installers running stable wired links to access points smart TVs NAS units gaming consoles or distant workstations where Wi Fi is unreliable. Buyers who need shielded cable for high EMI environments or shorter pre made lengths for patch panels should look at other options.

Highlights

  • 10 Gbps wired speed over 75 ft at 500 MHz
  • Cat6a standard works with existing Cat6 and Cat5e gear
  • 24 AWG bare copper with cross-spline core keeps signal clean
  • Gold-plated contacts and snagless boots survive repeated plugging
  • 100 m reach certified by UL and ETL for long runs

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length75 ft.
ColorBlue
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 6.9mm outer diameter fit through standard conduit and keystone jacks?

At 6.9mm OD the cable fits typical 3/4-inch conduit and standard keystone openings; the snagless boot adds only a few millimetres so it still seats cleanly in most patch panels and wall plates.

How do I terminate the cross-spline core without damaging the 24AWG pairs?

Untwist each pair only at the connector, keep the spline centred, and use a Cat6a-rated RJ45 plug with a staggered load bar — the 50-micron gold contacts then seat cleanly without nicking the bare copper.

When should I replace the cable if PoE devices start dropping link?

Inspect the boot and jacket for cracks after any sharp bends or crush points; if the 50-micron gold contacts show wear or the cross-spline is kinked, swap the 75ft run to restore reliable 10GBASE-T and PoE delivery.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.