We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray Cat6a patch cable with RJ45 connectors, 50ft length, 6.9mm diameter, snagless boots

Cable Leader

Cable Leader Cat6a Ethernet Cable 50ft 24AWG 500MHz 10GBASE-T Gray

SKU CH-J81B-ZA40C

A 50 ft Cat6a patch cable delivers 10 Gigabit wired networking at 500 MHz for gaming consoles, PCs and network gear with 24 AWG bare copper conductors, gold-plated RJ45 contacts and a snagless boot

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length50 ft.
  • ColorGray

Length 50ft

Show 9 more configurations

Color Gray

  • 10 Gbps wired speed over 50 ft at 500 MHz
  • 24 AWG bare copper with cross-spline core for signal integrity
  • 50 µm gold-plated RJ45 contacts resist corrosion
  • Snagless molded boots protect clips during routing
  • Backward compatible with Cat6 and Cat5e networks

50ft Cat6a cable for 10GBASE-T networks

This 50ft Cat6a Ethernet cable provides a 10 Gigabit wired link for gaming consoles, PCs, routers, switches and NAS devices. It uses 24AWG stranded bare copper conductors with a cross-spline core and 50-micron gold-plated RJ45 contacts. The snagless molded boots protect the locking clips during routing. It is RoHS compliant and UL & ETL Verified.

100m channel limit at 500MHz on Cat6a

The Cat6a standard supports 10GBASE-T up to 100 meters at 500MHz, so this 50ft length stays well within the channel budget. It is backward compatible with Cat6 and Cat5e equipment for a drop-in upgrade. Unshielded UTP construction suits typical home and office environments where alien crosstalk is low. PoE injectors and standard network gear work without changes.

Simple plug-and-play with snagless boots

Push the RJ45 connectors into any 8P8C port until the clip clicks; the snagless boot prevents the tab from catching on adjacent cables. The 6.9mm outer diameter is stiff enough to hold a route but flexible enough for desk or wall runs. The only common issue is forcing the clip past a tight port, which can bend the tab if you pull instead of pressing the release.

Highlights

  • 10 Gbps wired speed over 50 ft at 500 MHz
  • 24 AWG bare copper with cross-spline core for signal integrity
  • 50 µm gold-plated RJ45 contacts resist corrosion
  • Snagless molded boots protect clips during routing
  • Backward compatible with Cat6 and Cat5e networks

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length50 ft.
ColorGray
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Which length should I choose for a typical home or office run?

The 50 ft length works well for most desk-to-router or console-to-switch runs; Cat6a supports 10GBASE-T up to 100 m at 500 MHz, so 50 ft is well within the full-speed distance.

What real-world speed will I see on my PS5 or gaming PC?

The cable is rated for 10GBASE-T at 500 MHz, so a wired link to a PS5, Xbox or PC delivers a full 10 Gbps connection with lower latency and less jitter than Wi-Fi.

Is the RJ45 connector standard Cat6a or a different interface?

It uses standard 8P8C RJ45 plugs with 50-micron gold-plated contacts, fully compliant with the Cat6a 500 MHz specification and backward compatible with Cat6 and Cat5e ports.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.