We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange 100ft Cat6a UTP patch cable with RJ45 connectors

Cable Leader

Cable Leader 100ft Cat6a network ethernet cable Orange

SKU CH-3C2E-AW245

100 ft Cat6a UTP patch cable delivers 10 Gbps at 500 MHz with 24 AWG bare copper and gold-plated RJ45 connectors

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length100 ft.
  • ColorOrange

Length 100ft

Show 9 more configurations

Color Orange

  • 10 Gigabit wired speed backed by 500 MHz Cat6a rating
  • 100 ft reach for long runs between rooms or floors
  • 24 AWG bare copper conductors with cross-spline core for signal integrity
  • 50-micron gold-plated RJ45 contacts resist corrosion and ensure reliable connection
  • Snagless molded boots protect locking clips during install and routing

100ft Cat6a cable for long wired runs

This 100ft Cat6a Ethernet cable delivers a 10 Gigabit wired link for home and office networks. It supports 10GBASE-T up to 100 meters at 500MHz and drops straight into existing Cat6 or Cat5e setups. The orange jacket makes it easy to identify among other cables. It is built for runs between rooms, floors or across a building where Wi-Fi is unreliable.

Thermals noise and power draw

As a passive copper cable it generates no heat, produces no noise and draws no power of its own. The 24AWG stranded bare copper conductors and 4-pair cross-spline core maintain signal integrity over the full 100ft length. Gold-plated RJ45 contacts resist corrosion for a stable connection. The 6.9mm outer diameter handles cleanly during installation.

Snagless boots and cross-spline core

Snagless molded PVC boots protect the locking clips from damage when routing through tight spaces. The internal cross-spline separates the four twisted pairs to reduce crosstalk at 500MHz. UL and ETL verification plus RoHS compliance confirm the build quality. The cable works with routers, switches, PoE injectors, consoles, PCs, NAS and smart TVs.

Highlights

  • 10 Gigabit wired speed backed by 500 MHz Cat6a rating
  • 100 ft reach for long runs between rooms or floors
  • 24 AWG bare copper conductors with cross-spline core for signal integrity
  • 50-micron gold-plated RJ45 contacts resist corrosion and ensure reliable connection
  • Snagless molded boots protect locking clips during install and routing

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length100 ft.
ColorOrange
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I route the 6.9 mm cable through tight conduit without damaging the snagless boot?

Feed the connector first and pull gently; the molded boot protects the clip but adds bulk, so avoid sharp bends tighter than four times the outer diameter.

When should I replace the cable if the gold-plated contacts oxidise?

The 50-micron gold plating resists corrosion for years; replace only if you see intermittent link errors or visible green discolouration on the pins.

At what length does 10GBASE-T performance drop below the 500 MHz Cat6a rating?

The standard guarantees 10GBASE-T up to 100 metres; this 100 ft run is well within that limit, so sustained 10 Gb/s is maintained.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.