Cable Leader 6ft Cat6a Ethernet Cable 10 Gigabit 500MHz 24AWG Gray
- Network Ethernet Ca…
- 6A
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cable Leader
A 7 ft Cat6a patch cable rated for 10 Gigabit Ethernet at 500 MHz, built with 24 AWG stranded bare copper and gold-plated RJ45 connectors for low-latency gaming and reliable wired networking
The Cable Leader Cat6a cable is a 7 ft unshielded twisted-pair patch lead terminated with RJ45 connectors on both ends. It uses 24 AWG stranded bare copper conductors arranged in four pairs around a 6.9 mm cross-spline core. The connectors carry 50-micron gold-plated contacts and snagless molded boots. It is rated for 500 MHz bandwidth and supports 10GBASE-T up to 100 m, while remaining backward compatible with Cat6 and Cat5e equipment.
This length suits a desktop-to-switch run, a console-to-router connection or a patch-panel jumper where a longer cable would create clutter. It works with routers, modems, switches, PoE injectors, gaming consoles, PCs, NAS units and smart TVs. Installers who need shielded cable for high-EMI environments, plenum-rated jackets for air-handling spaces, or runs longer than 7 ft should select a different cable type.
The 24 AWG stranded copper and cross-spline geometry keep crosstalk low so the link maintains 500 MHz performance under continuous load rather than only in short bursts. Gold-plated contacts resist oxidation that can degrade signal integrity over time. The snagless boots protect the locking tabs during repeated re-seating, preventing intermittent disconnects that appear after frequent moves. RoHS compliance and UL & ETL verification confirm consistent manufacturing quality for long-term operation.
| Brand | GENERIC |
|---|---|
| Type | Network Ethernet Cables |
| Cat | 6A |
| Connector A | RJ45 |
| Connector B | RJ45 |
| Length | 7 ft. |
| Color | Yellow |
| Shielded | No |
| Wire Gauge | 24 AWG |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The cable uses standard 8P8C RJ45 connectors on both ends, so any router, switch, PC, PS5, Xbox or NAS with a Gigabit or 10GBASE-T RJ45 port will accept it directly.
Yes, the Cat6a standard is fully backward compatible; the cable will link at the highest speed both ports support, so it drops into Cat6 or Cat5e infrastructure without any hardware changes.
Check the link lights on both ports — they should show a 10 Gbps or 10G connection — and run a speed test between two 10GBASE-T devices to confirm throughput near 10 Gbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?