We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 12 ft Cat6a Ethernet patch cable with RJ45 connectors and snagless boots

Cable Leader

Cable Leader Cat6a 12ft Ethernet Cable Red 24AWG 500MHz 10GBASE-T

SKU CH-9PPX-G55J3

A 12 ft Cat6a patch cable supporting 10 Gbps at 500 MHz over 100 m with 24 AWG bare copper, gold-plated RJ45 contacts and snagless boots

  • TypeNetwork Ethernet Cables
  • Cat6A
  • Connector ARJ45
  • Connector BRJ45
  • Length12 ft.
  • ColorRed

Length 12ft

Show 9 more configurations

Color Red

  • 10GBASE-T up to 100m at 500MHz for 10 Gigabit wired speed
  • Low-latency gaming on PS5, Xbox and PC beats Wi-Fi stability
  • 24AWG bare copper with cross-spline core and 50-micron gold contacts
  • Snagless molded boots protect the locking clip and resist tangling
  • Backward compatible with Cat6 and Cat5e for a drop-in upgrade

Cable Leader 12ft Cat6a Patch Cable

This 12ft Cat6a Ethernet cable delivers a 10 Gigabit wired link for gaming, home and office networks. It uses 24AWG stranded bare copper conductors in a 4-pair cross-spline design with a 6.9mm outer diameter. Gold-plated 50-micron RJ45 contacts and snagless molded boots protect the locking clip. The cable is RoHS compliant and UL & ETL Verified.

Suits gamers and offices needing a drop

Ideal for PS5, Xbox, PC, router, switch, NAS or smart TV connections where a stable, low-latency wired path beats Wi-Fi. Backward compatible with Cat6 and Cat5e gear so it works with existing ports. Not for buyers who need shielded cable for noisy electrical environments or runs longer than the 100m Cat6a channel limit.

500MHz bandwidth enables 10GBASE-T to 100m

The Cat6a rating guarantees 500MHz performance, which is the single spec that decides whether this cable supports full 10 Gigabit speeds over the maximum channel distance. If your network only runs at 1 Gigabit, a lower-category cable would also work, so choose Cat6a when you need the 10G headroom.

Highlights

  • 10GBASE-T up to 100m at 500MHz for 10 Gigabit wired speed
  • Low-latency gaming on PS5, Xbox and PC beats Wi-Fi stability
  • 24AWG bare copper with cross-spline core and 50-micron gold contacts
  • Snagless molded boots protect the locking clip and resist tangling
  • Backward compatible with Cat6 and Cat5e for a drop-in upgrade

Specifications

BrandGENERIC
TypeNetwork Ethernet Cables
Cat6A
Connector ARJ45
Connector BRJ45
Length12 ft.
ColorRed
ShieldedNo
Wire Gauge24 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 24 AWG stranded bare copper cable run warm or draw noticeable power on a 100 meter 10GBASE-T link?

The cable is passive copper; it carries signal only and generates no measurable heat or power draw at 500 MHz.

What RJ45 port speed must my router or switch already have to use this 500 MHz Cat6a cable at 10 Gbps?

Your equipment needs 10GBASE-T (10 GbE) ports; the cable is backward compatible with 1 GbE and 100 MbE gear but will run at the port's speed.

Will the 6.9 mm outer diameter and cross-spline core fit cleanly alongside my existing Cat5e patch cords in a 24-port patch panel?

Yes — the 6.9 mm OD is standard for Cat6a UTP and the snagless boots slide into dense panels without catching on older cables.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.