We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue C14 to C15 power cord, 7 ft, 14 AWG SJT jacket, notched high-temp connector

Cable Leader

Cable Leader 7ft C14 to C15 Heavy Duty PDU Power Cord 14 AWG 15A 250V Blue

SKU CH-K3YV-M409X

A 7-foot heavy-duty PDU jumper with a C14 plug and high-temperature C15 connector, 14 AWG copper rated 15A at 250V, SJT jacket, UL Listed, blue for circuit identification

  • ColorBlue
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 7ft

Color Blue

  • Powers hot-running gear with a notched C15 connector rated for high-temperature C16 inlets
  • Heavy-duty 14 AWG copper carries 15 A at 250 V for server and PDU loads
  • Blue jacket enables quick circuit identification in dense rack environments
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • SJT jacket rated 105 °C and 300 V withstands demanding data-centre conditions

Heavy-duty PDU jumper for hot gear

This 7 ft cable connects a rack PDU or C13/C14 outlet to equipment that uses a high-temperature C16 inlet. The notched C15 connector is designed for network switches and other devices that run hot. It carries 15 A at 250 V over 14 AWG copper with an SJT jacket rated to 105 C and 300 V.

Check inlet type and power draw

Verify the target device has a C16 inlet; a standard C13 inlet will not accept the notched C15 plug. Confirm the equipment draws no more than 15 A so the 14 AWG conductors stay within rating. Ensure the PDU or source outlet is a C13 or C14 type to match the C14 plug.

Blue jacket simplifies rack wiring

The blue insulation colour-codes the circuit inside a crowded rack, making maintenance faster. UL Listed and CSA certified (file E210037) plus RoHS compliant. The cord replaces thinner leads when servers or switches need the higher 15 A capacity of 14 AWG instead of 16 AWG or 18 AWG alternatives.

Highlights

  • Powers hot-running gear with a notched C15 connector rated for high-temperature C16 inlets
  • Heavy-duty 14 AWG copper carries 15 A at 250 V for server and PDU loads
  • Blue jacket enables quick circuit identification in dense rack environments
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for verified safety
  • SJT jacket rated 105 °C and 300 V withstands demanding data-centre conditions

Specifications

BrandGENERIC
ColorBlue
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 7 ft cord arrive as a single C14-to-C15 jumper or do I need a separate C13 outlet strip?

The 7 ft cable is a single IEC 60320 C14-to-C15 jumper; the C14 plug goes straight into a rack PDU or C13/C14 outlet, no extra strip required.

When should I pick the 14 AWG blue version instead of the thinner 16 AWG or 18 AWG options?

Choose 14 AWG when the load draws up to 15 A at 250 V — typical for servers, PDUs and high-draw network switches — while 16 AWG covers 13 A and 18 AWG only 10 A.

What does the 15 A / 250 V rating mean once the cord is plugged into a hot-running switch?

The SJT-jacketed 14 AWG copper is rated 105 °C / 300 V, so it safely carries the full 15 A at 250 V even at the elevated temperatures found at a C16 inlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.