We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 4 ft IEC C14 to C15 power cord with notched high-temp connector

Cable Leader

Cable Leader 4 ft IEC C14 to C15 Heavy Duty PDU Power Cord 14 AWG 15A 250V White

SKU CH-8G8A-ZXRN2

A 4 ft heavy-duty PDU jumper with IEC C14 to C15 connectors, 14 AWG copper rated 15A/250V for high-temperature server gear

  • ColorWhite
  • Length41" - 4 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 4ft

Color White

  • C14 to C15 jumper powers high-temp C16 gear from rack PDU
  • C15 notched connector rated for 105C equipment inlets
  • 14 AWG copper carries 15A at 250V with SJT 300V jacket
  • White jacket enables circuit colour-coding in dense racks
  • UL Listed and CSA certified file E210037 RoHS compliant

Heavy-Duty PDU Jumper Cord

The Cable Leader 4 ft IEC C14 to C15 power cord is a heavy-duty PDU jumper built for high-temperature equipment. Its C14 plug connects to a rack PDU or C13/C14 outlet while the notched C15 connector mates with a C16 inlet on network switches or servers that run hot. The 14 AWG copper conductors are rated for 15A at 250V and wrapped in an SJT jacket rated to 105C and 300V. UL Listed and CSA certified (file E210037), it also carries RoHS compliance.

Suited for Rack Gear with C16 Inlets

This cord suits installers powering network switches, blade chassis or other rack devices that require the higher-temperature C15 connector. The white jacket aids circuit identification in dense racks. It is not for equipment that only accepts a standard C13 connector, nor for loads exceeding the 15A rating where a 12 AWG or larger conductor would be needed. Buyers needing longer reach or a different colour should look elsewhere.

Fits Standard Rack Power Chains

The C14 end plugs into any C13 or C14 outlet on a rack PDU, UPS or power strip, freeing the installer from hunting for a specialised high-temp outlet. The 41-inch length spans typical rack-to-device distances without excess slack. No additional adapters are required when the source already presents a C13/C14 socket and the load presents a C16 inlet.

Highlights

  • C14 to C15 jumper powers high-temp C16 gear from rack PDU
  • C15 notched connector rated for 105C equipment inlets
  • 14 AWG copper carries 15A at 250V with SJT 300V jacket
  • White jacket enables circuit colour-coding in dense racks
  • UL Listed and CSA certified file E210037 RoHS compliant

Specifications

BrandGENERIC
ColorWhite
Length41" - 4 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What PDU or outlet type must I already have to use the C14 plug on this cord?

The C14 plug inserts into a rack PDU or a standard IEC C13/C14 outlet.

Will the C15 connector fit the C16 inlet on my existing network switch that runs hot?

Yes — the notched C15 end is the higher-temperature IEC 60320 connector made for C16 inlets on hot-running gear.

How can I verify the cord is rated for the load after I install it?

The jacket is marked 14 AWG, 15A / 250V, SJT, 105C / 300V and carries UL Listed and CSA file E210037 certification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.