We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 2 ft C14 to C15 heavy-duty power cord with SJT jacket

Cable Leader

Cable Leader 2ft IEC C14 to C15 14 AWG 15A 250V Green computer power adapter cord

SKU CH-QFMH-WDHB0

A 2 ft green 14 AWG jumper with a C14 plug and high-temperature C15 connector for 15 A, 250 V PDU feeds, UL Listed and CSA certified

  • ColorGreen
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge14 AWG

Length 2ft

Color Green

  • Powers high-temperature gear via notched C15 connector to C16 inlet
  • Heavy-duty 14 AWG copper rated 15A at 250V for server loads
  • SJT jacket withstands 105C continuous operating temperature
  • Green colour codes rack circuits for quick identification
  • UL Listed and CSA certified (file E210037) with RoHS compliance

PDU jumper for high-temp gear

This IEC 60320 C14-to-C15 cord connects a rack PDU or C13/C14 outlet to network switches and other equipment that uses a high-temperature C16 inlet. The notched C15 connector is built for the heat those devices generate. It is a direct replacement for standard C13 cords that cannot handle the higher inlet temperature. Buyers who need a straight C13-to-C14 cord for ordinary servers should choose a different cable.

Heavy-duty 14 AWG under continuous load

The 14 AWG SJT-jacketed copper conductors are rated for 15 A at 250 V and a cable temperature of 105 °C with a 300 V insulation rating. This gauge maintains its rating during sustained server and PDU operation rather than only in short bursts. The UL Listed and CSA certified construction (file E210037) confirms the materials meet the safety standard for continuous duty. Installations that require 20 A capacity need a 12 AWG cord instead.

Green jacket for circuit identification

The green SJT jacket lets technicians colour-code individual circuits inside a rack at a glance. Length falls between 21 in and 25 in, keeping the jumper short enough to avoid slack while reaching adjacent PDU outlets. RoHS-compliant materials satisfy restricted-substance requirements. Racks that use a different colour scheme for power paths will need a cord in another colour.

Highlights

  • Powers high-temperature gear via notched C15 connector to C16 inlet
  • Heavy-duty 14 AWG copper rated 15A at 250V for server loads
  • SJT jacket withstands 105C continuous operating temperature
  • Green colour codes rack circuits for quick identification
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorGreen
Length21" - 25"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 14 AWG cable run hot when powering a 15A server load all day?

The SJT jacket is rated to 105C and the cord carries 15A at 250V, so it stays within its thermal limits under continuous full-load use.

What inlet must my equipment already have for the C15 end to fit?

The notched C15 connector mates only with a high-temperature C16 inlet, which is standard on many network switches and hot-running rack gear.

Will the C14 plug work with the older C13 outlets on my existing PDU?

Yes, the C14 plug inserts into any standard C13 or C14 outlet, so it connects directly to legacy rack PDUs without adapters.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.