We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 2 ft IEC C14 to notched C15 power cord, SJT jacket

Cable Leader

Cable Leader 2ft IEC C14 to C15 14 AWG 15A 250V White computer power adapter cord

SKU CH-CZK3-DHMJB

A 2 ft heavy-duty PDU jumper with a C14 plug and high-temperature C15 connector, 14 AWG copper rated 15A/250V, SJT jacket, UL Listed and CSA certified, white for rack colour-coding

  • ColorWhite
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge14 AWG

Length 2ft

Color White

  • Powers hot-running gear via high-temp C15 connector to C16 inlet
  • Heavy-duty 14 AWG copper handles up to 15A at 250V
  • UL Listed and CSA certified (file E210037) for safety
  • White SJT jacket aids circuit identification in server racks
  • 2 ft length suits compact rack-to-equipment jumper runs

Heavy-duty PDU jumper for hot-running gear

This 2 ft white cord links a rack PDU or C13/C14 outlet to network switches and other equipment that uses a high-temperature C16 inlet. The notched C15 connector is the higher-temperature IEC 60320 variant designed for gear that runs hot. It is built for server racks and data-centre cabinets where colour-coded circuits simplify maintenance.

14 AWG copper with SJT jacket rated to 105C

The three-conductor 14 AWG cable carries 15A at 250V and is UL Listed and CSA certified (file E210037). The SJT jacket is rated for 105C and 300V, so the cord handles the heat from high-draw equipment without softening. RoHS compliant construction meets restricted-substance requirements.

C14-to-C15 IEC 60320 pairing for C16 inlets

The cord only works when the source has a C13/C14 outlet and the device has a C16 inlet; it will not fit standard C13 or C14 equipment ports. Buyers whose hardware uses ordinary C13 inlets need a different IEC cord.

Highlights

  • Powers hot-running gear via high-temp C15 connector to C16 inlet
  • Heavy-duty 14 AWG copper handles up to 15A at 250V
  • UL Listed and CSA certified (file E210037) for safety
  • White SJT jacket aids circuit identification in server racks
  • 2 ft length suits compact rack-to-equipment jumper runs

Specifications

BrandGENERIC
ColorWhite
Length21" - 25"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I plug the C14-to-C15 cord into my rack PDU and switch, and which orientation mistake should I avoid?

Insert the C14 plug into the PDU or C13/C14 outlet, then seat the notched C15 connector fully into the equipment's C16 inlet — the notch only fits one way, so forcing it backwards is the common error.

What maintenance or replacement will this 14 AWG SJT jumper need over time?

No routine maintenance is required; inspect the white jacket and connectors during rack audits and replace the cord only if you see cracking, discoloration, or a loose fit on the C16 inlet.

What is the first limit I'll hit when running this cord at continuous load in a hot rack?

The 15 A / 250 V rating and the 105 °C SJT jacket temperature ceiling are the simultaneous limits — sustained current above 15 A or ambient heat pushing the cable past 105 °C will trigger failure first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.