We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 4 ft IEC C14 to C15 power cord with notched high-temp connector and SJT jacket

Cable Leader

Cable Leader 4 ft IEC C14 to C15 Heavy Duty PDU Power Cord 14 AWG 15A 250V Blue

SKU CH-AXJN-39KDZ

Heavy-duty 4 ft PDU jumper with C14 plug and high-temperature C15 connector, 14 AWG copper rated 15A/250V, UL Listed, blue jacket

  • ColorBlue
  • Length41" - 4 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 4ft

Color Blue

  • C14 to C15 jumper powers hot-running gear from a rack PDU
  • High-temp C15 connector fits C16 inlets on network switches
  • Heavy-duty 14 AWG copper handles 15A at 250V
  • Blue SJT jacket simplifies circuit identification in the rack
  • UL Listed and CSA certified for safety compliance

Heavy-Duty PDU Jumper for High-Temperature Gear

The Cable Leader 4 ft IEC C14 to C15 cord connects a rack PDU or C13/C14 outlet to equipment that uses a high-temperature C16 inlet. Its notched C15 connector is rated for the heat produced by network switches and similar hardware. The 14 AWG copper conductors carry 15A at 250V inside an SJT jacket rated to 105C and 300V. UL Listed and CSA certified (file E210037), RoHS compliant.

Suits 15A Rack Circuits.

Builders wiring 15A server or networking circuits will match the 14 AWG gauge to the load. The C15 end only fits a C16 inlet, so gear with standard C14 inlets cannot use this jumper. Installations limited to 10A or 13A can step down to 18 AWG or 16 AWG cords instead. Buyers needing a straight C13 connector should select a different cable.

Fits Standard Rack PDU Spacing.

The 41-inch length reaches between typical rack-mounted PDUs and switches without excess slack. Blue jacket colour-codes the circuit for quick identification. The cord draws power from any C13/C14 source and delivers it to a single C16 inlet, leaving neighbouring PDU outlets free for other jumpers. Lifetime replacement backing from the US-based brand.

Highlights

  • C14 to C15 jumper powers hot-running gear from a rack PDU
  • High-temp C15 connector fits C16 inlets on network switches
  • Heavy-duty 14 AWG copper handles 15A at 250V
  • Blue SJT jacket simplifies circuit identification in the rack
  • UL Listed and CSA certified for safety compliance

Specifications

BrandGENERIC
ColorBlue
Length41" - 4 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What rack PDU outlet do I need to plug the C14 end into?

The C14 plug fits any standard C13 or C14 outlet on a rack PDU or UPS.

Will the C15 connector fit the C16 inlet on my existing network switch?

Yes — the notched C15 connector is the higher-temperature IEC 60320 type made for C16 inlets on hot-running gear.

How can I confirm the cord is rated for 15 A at 250 V after I install it?

Check the jacket printing for 14 AWG SJT 105C 300V and the UL Listed mark with file E210037.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.