We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 4 ft IEC C14 to C15 power cord with notched high-temp connector and SJT jacket

Cable Leader

Cable Leader 4 ft IEC C14 to C15 14 AWG 15A 250V Red computer power adapter cord

SKU CH-RP55-6BV9D

A 4 ft heavy-duty 14 AWG jumper that feeds high-temperature C16 inlets from a rack PDU using a C14 plug and notched C15 connector, rated 15A/250V with UL and CSA certification

  • ColorRed
  • Length41" - 4 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 4ft

Color Red

  • C14-to-C15 jumper powers high-temperature C16 inlets from rack PDUs
  • Notched C15 connector rated for hot-running network switches and servers
  • 14 AWG copper carries 15 A at 250 V with 105 °C SJT jacket
  • Red jacket enables colour-coded circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

IEC C14 to C15 PDU Jumper

This red 4 ft cord connects a rack PDU or C13 outlet to equipment that uses a high-temperature C16 inlet. The notched C15 connector is built for network switches and servers that run hotter than standard gear. It is a replacement or extension cable for existing power distribution units.

Plug-and-play installation

Align the C14 plug with the PDU outlet and the C15 end with the device inlet; both connectors are keyed and seat with a firm push. The only common error is trying to fit the notched C15 into a standard C14 inlet, which will not engage.

14 AWG 15A 250V rating

The 14 AWG SJT copper conductors carry up to 15 amps at 250 volts with a 105°C / 300 V cable rating. UL Listed and CSA certified (file E210037). Buyers who need a standard C13 connector for lower-temperature equipment should choose a different cable.

Highlights

  • C14-to-C15 jumper powers high-temperature C16 inlets from rack PDUs
  • Notched C15 connector rated for hot-running network switches and servers
  • 14 AWG copper carries 15 A at 250 V with 105 °C SJT jacket
  • Red jacket enables colour-coded circuit identification in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorRed
Length41" - 4 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the cord is working after plugging the C14 end into my PDU and the C15 end into the C16 inlet?

The notched C15 connector seats firmly into the C16 inlet and the red SJT jacket stays cool under load up to 105C, so normal operation means no heat at the connectors and steady power to the switch.

What comes in the box and do I need anything else to connect a network switch to a rack PDU?

The single 4 ft red cord with C14 and C15 ends is supplied; no extra adapters are required if the PDU offers C13/C14 outlets and the switch has a C16 inlet.

Which gauge should I choose for a 15 A server circuit — 14 AWG or a thinner option?

14 AWG is rated for 15 A at 250 V, while 16 AWG only reaches 13 A and 18 AWG stops at 10 A, so the 14 AWG cord matches the full 15 A PDU breaker.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.