We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 1 ft IEC C14 to C15 heavy duty PDU power cord with SJT jacket

Cable Leader

Cable Leader 1ft IEC C14 to C15 Heavy Duty PDU Power Cord 14 AWG 15A 250V Red computer power adapter cord

SKU CH-C8TH-9D3VP

A 1 ft red IEC 60320 C14-to-C15 jumper with 14 AWG SJT cable rated 15A at 250V for high-temperature C16 inlets on rack PDUs, UL Listed and CSA certified

  • ColorRed
  • Length11" - 15"
  • Connector Number2
  • Wire Gauge14 AWG

Length 1ft

Color Red

  • Connects high-temp gear via IEC 60320 C14 to notched C15
  • Handles 15A at 250V with 14 AWG copper and SJT jacket
  • Rated for 105C cable temperature and 300V insulation
  • Red jacket enables colour-coded circuit identification in racks
  • UL Listed and CSA certified file E210037 plus RoHS compliant

IEC C14 to C15 PDU jumper

This one-foot red cord connects a rack PDU or C13/C14 outlet to equipment that uses a high-temperature C16 inlet. The notched C15 connector is the IEC 60320 standard for gear that runs hot, such as network switches and dense server nodes. It replaces a standard C13 lead when the inlet demands the higher-temperature rating. The heavy-duty 14 AWG SJT construction supports 15A at 250V with a 105C cable rating.

Upgrade from C13 to C15 for hot inlets

Swap a C13 cord for this C15 version when the device presents a C16 inlet or when the manufacturer specifies a high-temperature connector. The jump is worth it whenever the equipment draws up to 15A and the environment calls for the 105C jacket rating. Builders using lighter 16 AWG or 18 AWG leads for servers and PDUs should move to 14 AWG to match the 15A capacity. Do not use this cord where a standard C13 inlet is present.

Rack-ready power link

The red jacket enables colour-coded circuit identification in dense racks. The cord needs a C13/C14 source on the PDU side and a C16 inlet on the device side. UL Listed and CSA certified (file E210037) with RoHS compliance. It frees up adjacent PDU outlets by keeping the jumper short and tidy. Buyers who need a standard C13 connector or a longer reach should select a different cable.

Highlights

  • Connects high-temp gear via IEC 60320 C14 to notched C15
  • Handles 15A at 250V with 14 AWG copper and SJT jacket
  • Rated for 105C cable temperature and 300V insulation
  • Red jacket enables colour-coded circuit identification in racks
  • UL Listed and CSA certified file E210037 plus RoHS compliant

Specifications

BrandGENERIC
ColorRed
Length11" - 15"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What rack PDU outlet does the IEC 60320 C14 plug on this 1 ft jumper connect to?

The C14 plug fits a standard C13 outlet on a rack PDU or any C13/C14 power source in the cabinet.

Which way round do the connectors go when installing this C14-to-C15 cord?

Plug the C14 end into the PDU or C13 outlet first, then seat the notched C15 connector onto the equipment's C16 inlet; reversing them will not work.

When should the red SJT-jacketed 14 AWG cable be inspected or replaced?

Check the jacket for cracks or heat discoloration after any sustained 105 °C ambient exposure or if the cord carries near its 15 A / 250 V rating continuously.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.