We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 6 ft C14 to C15 power cord with notched connector and SJT jacket

Cable Leader

Cable Leader 6ft C14 to C15 14 AWG 15A 250V White PDU Power Cord

SKU CH-GF08-6M667

Heavy-duty 14 AWG C14-to-C15 PDU jumper rated 15 A / 250 V for high-temperature server inlets, UL listed

  • ColorWhite
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 6ft

Color White

  • Powers high-temperature gear via notched C15 connector for C16 inlets
  • Heavy-duty 14 AWG copper handles 15A at 250V for server loads
  • SJT jacket rated 105C and 300V withstands demanding rack environments
  • White jacket enables colour-coded circuit identification in dense installations
  • UL Listed and CSA certified (file E210037) with RoHS compliance

White 6ft PDU jumper for hot gear

This white six-foot cable connects a rack PDU or standard C13 outlet to equipment that uses a high-temperature C16 inlet. The notched C15 connector is keyed for that hotter socket so it seats correctly on network switches and other heat-producing hardware. It is a direct replacement or extension for existing IEC 60320 C14-to-C15 runs in a server cabinet.

14 AWG copper with SJT jacket

The cord uses three-conductor 14 AWG copper rated for 15 amps at 250 volts and an SJT jacket rated to 105 degrees Celsius and 300 volts. That gauge supports heavier server and PDU loads where thinner 18 or 16 AWG cords would be undersized. UL Listing and CSA certification (file E210037) plus RoHS compliance confirm the build meets recognised safety standards.

Sustained load on warm inlets

Under continuous draw the heavier 14 AWG conductors and 105 °C jacket keep voltage drop low and insulation stable even when the attached equipment exhausts hot air toward the connector. The white jacket also makes circuit tracing easier in a dense rack. Buyers who need a straight C13 connector for standard inlets or a longer reach than six feet should select a different cable.

Highlights

  • Powers high-temperature gear via notched C15 connector for C16 inlets
  • Heavy-duty 14 AWG copper handles 15A at 250V for server loads
  • SJT jacket rated 105C and 300V withstands demanding rack environments
  • White jacket enables colour-coded circuit identification in dense installations
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorWhite
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is the maximum continuous current this 14 AWG cord can carry without overheating?

The 14 AWG copper conductors are rated for 15 A at 250 V, which is the limit for sustained server or PDU loads.

How hot does the SJT jacket get when the cord runs at full load all day?

The jacket is rated to 105 °C, so it remains within specification even when the cord carries 15 A continuously.

What inlet must the target device have for the C15 connector to fit?

The equipment needs a notched C16 inlet; the C15 end will not mate with a standard C14 inlet.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.