Cable Leader 6ft C14 to C15 14 AWG 15A 250V White PDU Power Cord
- White
- 5 - 10 ft.
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Cable Leader
An 8 ft white PDU jumper with a C14 plug and high-temperature C15 connector, 14 AWG copper rated 15 A / 250 V, UL Listed and CSA certified
This IEC 60320 C14-to-C15 cord connects a rack PDU or C13/C14 outlet to network switches and other equipment that uses a high-temperature C16 inlet. The notched C15 connector is rated for the higher heat those devices produce. The white SJT jacket makes circuit identification easier in dense racks. It ships new with UL and CSA certifications.
The 14 AWG copper conductors carry up to 15A at 250V inside a 105C-rated SJT jacket rated to 300V. That gauge is specified for servers, PDUs and higher-draw equipment rather than lighter 16 AWG or 18 AWG cords. The heavy-duty construction keeps voltage drop low across the eight-foot run. No active cooling is involved.
The cord needs a C13/C14 source on the PDU side and a C16 inlet on the device side. It frees up a standard C13 outlet while delivering the higher temperature rating the target gear requires. The white jacket helps trace the circuit without extra labels. Buyers who need a straight C13 connector or a longer reach should choose a different cable.
| Brand | GENERIC |
|---|---|
| Color | White |
| Length | 5 - 10 ft. |
| Connector Number | 2 |
| Wire Gauge | 14 AWG |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Insert the C14 plug fully into the PDU or C13 outlet until it clicks; connect the notched C15 end to the equipment's C16 inlet. The common error is forcing a C15 into a standard C14 inlet — the notch prevents this, so verify your device has a C16 inlet first.
No routine maintenance is required. Inspect the white jacket periodically for cuts, abrasion or heat discoloration, especially near the connectors. Replace the cord if the insulation is damaged, the pins are bent, or the connector housing cracks — the UL Listed and CSA certified construction (file E210037) is rated for long service.
The 14 AWG copper conductors and 105 °C SJT jacket set the continuous ceiling at 15 A / 250 V. Exceeding 15 A will trip upstream protection or overheat the cable before the 300 V insulation rating becomes a factor.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?