We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 15 ft IEC C14 to notched C15 power cord with SJT jacket

Cable Leader

Cable Leader 15ft IEC C14 to C15 14 AWG 15A 250V Blue computer power adapter cord

SKU CH-ZD9G-DYXAS

A 15 ft heavy-duty PDU jumper with a C14 plug and high-temperature C15 connector, 14 AWG copper rated 15A at 250V, UL Listed and CSA certified, blue jacket for rack circuit identification

  • ColorBlue
  • Length11 - 15 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 15ft

Color Blue

  • Powers high-temp gear via notched C15 connector to C16 inlet
  • Heavy-duty 14 AWG copper handles 15A at 250V for servers and PDUs
  • SJT jacket rated 105C and 300V withstands demanding rack environments
  • Blue colour simplifies circuit identification in dense installations
  • UL Listed and CSA certified (file E210037) with RoHS compliance

PDU jumper for hot-running gear

This 15 ft IEC C14 to C15 cord connects a rack PDU or C13/C14 outlet to network switches and servers that use a high-temperature C16 inlet. The notched C15 connector is the higher-temperature IEC 60320 variant designed for equipment that runs hot. Blue jacket colour helps identify circuits in a crowded rack. It is a heavy-duty cable built for continuous server-room use.

Sustained-load construction

The cable uses 14 AWG, three-conductor copper with an SJT jacket rated to 105 °C and 300 V. That gauge is specified for up to 15 A at 250 V, matching the draw of PDUs and higher-draw servers rather than light electronics. UL Listing and CSA certification (file 210037) confirm the safety rating for continuous operation. RoHS compliance means restricted substances are absent.

Gauge decides the application

A 14 AWG cord is the step that supports 15 A loads; 18 AWG stops at 10 A and 16 AWG at 13 A. If the connected gear draws more than 15 A, a 12 AWG cord rated to 20 A is required instead. Buyers who need a standard C13 connector for cooler-running equipment cannot use this C15 version.

Highlights

  • Powers high-temp gear via notched C15 connector to C16 inlet
  • Heavy-duty 14 AWG copper handles 15A at 250V for servers and PDUs
  • SJT jacket rated 105C and 300V withstands demanding rack environments
  • Blue colour simplifies circuit identification in dense installations
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorBlue
Length11 - 15 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 14 AWG SJT jacket stay cool when the cord runs at 15A all day?

The 14 AWG copper with a 105 °C SJT rating is designed for continuous 15A / 250V loads in rack PDUs and high-temperature gear.

What rack outlet and equipment inlet must I already have to use this C14-to-C15 jumper?

You need a C13 or C14 outlet on the PDU side and a notched C16 inlet on the server or switch side.

Can I plug this blue 15 ft jumper into an older PDU that only offers C13 sockets?

Yes — the C14 plug fits standard C13 sockets, and the C15 connector mates with any C16 inlet on legacy switches or servers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.