We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two rectangular grey thermal pads 120 by 20 by 3.0 mm

GELID SOLUTIONS

GELID SOLUTIONS GP-Ultimate Thermal Pad 15W/mK 120x20mm 3.0mm 2pcs

SKU CH-ZY7F-0B9KH

High-conductivity 15 W/mK thermal pad measuring 120×20×3.0 mm, non-conductive and non-curing, supplied as a two-piece pack for VRM, memory and M.2 SSD cooling

Option 120 x 20 x 3.0 mm

  • First-class heat transfer with 15W/mK thermal conductivity
  • Non-electrically conductive, non-corrosive, non-hardening and non-toxic material
  • Supports extended operating range from -60°C to 220°C
  • Two pre-cut 120x20mm pads sized for VRM, DRAM and M.2 components
  • Available in 0.5, 1.0, 1.5, 2.0 and 3.0mm thicknesses

Ultimate Thermal Pad for SMD Components

The GP-Ultimate thermal pad delivers 15W/mK thermal conductivity for high-temperature SMD components such as VRM ICs, DRAM modules and power MOSFETs. Its non-electrically conductive, non-corrosive and non-toxic composition ensures safe operation across a -60°C to 220°C range. The 120x20mm dimensions suit enlarged surfaces on graphics cards, memory modules and M.2 SSDs.

Capacity and Headroom

Each 3.0mm thick pad fills larger gaps between uneven PCB surfaces and heatsinks where thinner interfaces would leave voids. The two-piece pack covers multiple zones such as GPU VRM arrays and RAM banks simultaneously. Thinner 0.5, 1.0, 1.5 and 2.0mm variants exist for tighter tolerances, so this thickness is not suited to minimal clearance applications.

Deciding Specification

The 15W/mK thermal conductivity rating determines whether this pad meets the heat-flux demands of your specific VRM or memory cooling scenario. Buyers needing lower conductivity for less demanding ICs or higher conductivity for extreme overclocking should select a different grade.

Highlights

  • First-class heat transfer with 15W/mK thermal conductivity
  • Non-electrically conductive, non-corrosive, non-hardening and non-toxic material
  • Supports extended operating range from -60°C to 220°C
  • Two pre-cut 120x20mm pads sized for VRM, DRAM and M.2 components
  • Available in 0.5, 1.0, 1.5, 2.0 and 3.0mm thicknesses

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 3.0mm thickness bridge the gap on my older GPU VRM area where the original pads are thinner?

The pad measures 3.0mm thick; if your VRM-to-heatsink clearance is smaller it may compress but could also stress the board, so measure the gap before applying.

How can I confirm the 15W/mK thermal conductivity is performing after I install the pads?

Monitor component temperatures under load; a drop in VRM or memory junction temps compared to the previous interface indicates the pad is conducting heat as specified.

Does the pack include any cleaning wipes or tools, or do I need to buy them separately?

The box contains two 120x20mm pads only; isopropyl alcohol, lint-free cloths and any plastic spreaders must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.