We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 6 ft IEC C14 to C13 heavy duty power extension cord with SJT jacket

Cable Leader

Cable Leader 6ft IEC C14 to C13 Heavy Duty Power Extension Cord 14 AWG 15A 250V Green

SKU CH-0ZFZ-S9AFG

A 6 ft green 14 AWG extension cord that lengthens C14-to-C13 power links up to 15 A and 250 V for server racks and PDUs

  • TypeExtension Cable
  • ColorGreen
  • Length6 ft.
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG

Length 6ft

Color Green

  • Adds reach between PDU, UPS or server and existing cord with male C14 to female C13 connection
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server and rack loads
  • Green SJT jacket enables quick circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance
  • Standard IEC 60320 C14/C13 connectors fit servers, switches and AV gear without adapters

What this cord does and who uses it

This green 6 ft extension cord adds reach between a C14 power inlet and a C13 connector on servers, rack PDUs or UPS units. It is built for equipment that draws up to 15 A at 250 V, so it suits data-centre and networking gear rather than light desktop peripherals.

Practical limits of the IEC 60320 C14/C13 interface

The cord uses 14 AWG copper conductors rated 15 A / 250 V with an SJT jacket rated 105 °C / 300 V. It will not support loads above 15 A; for 20 A circuits a 12 AWG cable is required. The connectors follow the IEC 60320 standard used on most rack-mount power equipment.

Installation and common issues

Plug the male C14 end into the PDU or UPS outlet and the female C13 end into your device cord — no tools or adapters needed. The green jacket helps trace circuits in a crowded rack. The only common mistake is using the cord on a 20 A branch circuit where 12 AWG is mandated by code.

Highlights

  • Adds reach between PDU, UPS or server and existing cord with male C14 to female C13 connection
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server and rack loads
  • Green SJT jacket enables quick circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance
  • Standard IEC 60320 C14/C13 connectors fit servers, switches and AV gear without adapters

Specifications

TypeExtension Cable
ColorGreen
Length6 ft.
Terminal GenderMale to Female
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the 14 AWG cord or a thinner gauge for my server rack?

Choose 14 AWG when the load draws up to 15A; 16 AWG is limited to 13A and 18 AWG to 10A, so 14 AWG suits servers, PDUs and higher-draw equipment.

What does the 15A 250V rating mean once the cord is installed?

The cord carries up to 15A at 250V with its 3-conductor copper and SJT jacket rated 105C/300V, matching typical rack PDU and server power supplies.

Which interface does the IEC 60320 C14 to C13 connection use and what does it cap in practice?

The IEC 60320 C14 male plug and C13 female socket are the standard rack and PDU interface, capping the connection at 15A/250V per the cord's 14 AWG rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.