Cable Leader 3ft C14 to C13 Heavy Duty Power Extension Cord 14 AWG 15A 250V White

Rack PDU extension with C14 to C13 connectors

This three-foot cord extends an existing C14-to-C13 power link by placing a male IEC 60320 C14 plug on one end and a female C13 socket on the other. It is intended for server racks, PDUs, UPS units and network gear that use the standard IEC 60320 interface. The white SJT jacket helps technicians trace circuits and phases at a glance. Buyers who need a longer run or a different connector gender will not be served by this item.

Verify plug gender and current rating before

Confirm that your power source presents a C14 inlet and that your equipment cord terminates in a C13 plug; the cord only works in that orientation. The 14 AWG copper conductors are rated for 15 A at 250 V, so the connected load must not exceed that continuous current. The cable carries a 105 °C / 300 V insulation rating and is UL Listed and CSA certified under file E210037. Installations requiring 12 AWG for 20 A circuits or 16 AWG for lighter loads should select a different gauge.

Sustained 15 A load with 105 °C insulation

Under continuous server or PDU loads the 14 AWG conductors and SJT jacket maintain their temperature rating without derating for short bursts. The grounded three-conductor construction and UL/CSA certification ensure consistent performance across the full 15 A rating. The white jacket remains identifiable in dense racks during extended operation. Environments that demand 20 A capacity or higher temperature margins will require a heavier gauge.