We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 5 ft IEC C14 to C13 extension cord with SJT jacket

Cable Leader

Cable Leader 5ft IEC C14 to C13 Heavy Duty Power Extension Cord 14 AWG 15A 250V White

SKU CH-6PRN-RJ4RK

Heavy-duty 14 AWG cord extends IEC C14-to-C13 power connections for servers and racks, rated 15A/250V with UL and CSA certification

  • ColorWhite
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 5ft

Color White

  • Extends C14 to C13 power connections without adapters
  • Heavy-duty 14 AWG copper rated 15A at 250V
  • SJT jacket withstands 105C and 300V cable rating
  • White jacket simplifies circuit tracing in server racks
  • UL Listed and CSA certified with RoHS compliance

Extends C14 to C13 power connections

This five-foot extension cord bridges a male IEC 60320 C14 plug to a female C13 socket so a server, switch or AV device can reach a rack PDU or UPS without an adapter. The white SJT jacket helps technicians trace circuits and phases at a glance in dense racks. It is built with three-conductor 14 AWG copper rated for 15A at 250V and a 105C / 300V cable rating. UL Listed and CSA certified (file 210037) with RoHS compliance.

Replaces shorter or lighter-gauge cords

When an existing C13 cable cannot reach the power source this cord adds the missing length while stepping up from 18 AWG (10A) or 16 AWG (13A) to the 14 AWG 15A rating required by many servers and PDUs. The upgrade is worth it whenever the load exceeds 13A or the installation demands the higher 105C temperature rating. It does not serve 20A equipment that needs 12 AWG conductors.

Limited to IEC 60320 C14/C13 interfaces

The cord only works with equipment that uses the standard C14 inlet and C13 connector pair found on most rack PDUs, UPS units, servers and network gear. It cannot connect to proprietary inlets, higher-amperage twist-lock plugs or any non-IEC power system. The 15A / 250V rating also caps the maximum load, so devices drawing more than 15A require a heavier gauge and different connector.

Highlights

  • Extends C14 to C13 power connections without adapters
  • Heavy-duty 14 AWG copper rated 15A at 250V
  • SJT jacket withstands 105C and 300V cable rating
  • White jacket simplifies circuit tracing in server racks
  • UL Listed and CSA certified with RoHS compliance

Specifications

BrandGENERIC
ColorWhite
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What rack spacing does the 5 ft length suit for a PDU-to-server run?

The 5 ft cord bridges typical rack PDU-to-server distances; the male C14 and female C13 IEC 60320 connectors fit standard outlets.

Which way round do the C14 plug and C13 socket go when connecting to a PDU and an existing cord?

Insert the male C14 plug into the PDU or UPS outlet first, then plug your existing cord into the female C13 socket — reversing them leaves the live pins exposed.

When should the SJT-jacketed 14 AWG cord be replaced?

Replace it if the white jacket shows cracks, the connectors feel loose, or the cord gets hot during 15 A / 250 V loads.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.