We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 3-foot IEC C14 to C13 heavy-duty power extension cord with SJT jacket

Cable Leader

Cable Leader 3ft IEC C14 to C13 Heavy Duty Power Extension Cord 14 AWG 15A 250V Green

SKU CH-SFA6-NNEZ7

A green 3 ft heavy-duty 14 AWG extension cord adds reach between C14 and C13 power connectors at 15A/250V

  • ColorGreen
  • Length36" - 40"
  • Connector Number2
  • Wire Gauge14 AWG

Length 3ft

Color Green

  • Extends C14/C13 reach between PDU and equipment without adapters
  • Heavy-duty 14 AWG copper handles 15A 250V server loads
  • UL Listed and CSA certified (file E210037) for safety
  • Green jacket enables quick circuit tracing in dense racks
  • Lifetime replacement warranty backed by US-based Cable Leader support

Power extension for rack PDUs

This three-foot cord bridges a male IEC 60320 C14 plug to a female C13 socket so you can extend the reach between a rack PDU, UPS or server and an existing power cable. The green SJT jacket makes it easy to trace circuits and phases in a dense rack. It is built for new installations that need a certified, heavy-duty link without adding adapters.

Sustained load behaviour

The 14 AWG three-conductor copper construction is rated for 15 amps at 250 volts, matching the draw of typical servers, switches and higher-power AV gear. A 105 °C temperature rating and 300-volt cable rating mean the conductors stay within safe limits during continuous operation. The UL and CSA certifications confirm the assembly meets the safety margins required for data-centre duty cycles.

Thermals noise and power draw

As a passive cable it generates no audible noise and adds negligible resistance to the circuit. The SJT jacket remains flexible at the rated 105 °C, so heat from adjacent equipment does not degrade the insulation. Power loss is limited to the inherent voltage drop of the 14 AWG conductors at the rated 15-amp load.

Highlights

  • Extends C14/C13 reach between PDU and equipment without adapters
  • Heavy-duty 14 AWG copper handles 15A 250V server loads
  • UL Listed and CSA certified (file E210037) for safety
  • Green jacket enables quick circuit tracing in dense racks
  • Lifetime replacement warranty backed by US-based Cable Leader support

Specifications

BrandGENERIC
ColorGreen
Length36" - 40"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 14 AWG SJT jacket and 15A rating run warm during continuous server rack duty?

The cord uses 14 AWG 3-conductor copper with a 105C / 300V SJT jacket, rated for 15A at 250V, so it handles continuous server and PDU loads without overheating.

What must I already own to use this C14-to-C13 extension?

You need a power source with a C13 outlet — such as a rack PDU or UPS — and a device or existing cord with a C14 plug to insert into the female end.

Will the green 14 AWG cord work with older C13-equipped servers and switches I keep in the rack?

Yes — the IEC 60320 C14 male and C13 female connectors are the long-standing standard on servers, switches and AV gear, so it fits legacy equipment directly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.