We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 4 ft C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 4ft C14 to C13 14 AWG 15A Green Power Extension Cord

SKU CH-6T69-YB40Z

A green 14 AWG IEC 60320 C14-to-C13 extension cord adds 4 ft of reach for server, PDU or UPS power connections at 15A/250V

  • ColorGreen
  • Length41" - 4 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 4ft

Color Green

  • Extends C14/C13 reach between PDU, UPS or server and existing cord without an adapter
  • Heavy-duty 14 AWG copper rated 15A/250V with SJT jacket for server and rack loads
  • IEC 60320 connectors standard on servers, switches and AV gear for direct compatibility
  • Green jacket enables quick circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance

4 ft C14 to C13 Power Extension

This green 4 ft cord extends the reach between a C14 inlet on a PDU or UPS and an existing C13 power cord. It uses a male IEC 60320 C14 plug and a female C13 socket so no adapter is required. The 14 AWG SJT jacketed cable contains three grounded copper conductors. It is UL Listed and CSA certified for data-centre use.

Suits Rack Builds Needing Circuit Tracing

The green jacket lets technicians identify phases or circuits at a glance inside a crowded rack. It supports continuous loads up to 15 A at 250 V with a 105 °C temperature rating. Builders who need longer runs or a higher 20 A rating should look at a different gauge or length. This cord only adds reach to an existing C14/C13 link.

14 AWG Capacity and Headroom

The 14 AWG construction comfortably handles servers, switches and PDUs drawing up to 15 A. It provides headroom above 16 AWG cords rated for 13 A and 18 AWG cords rated for 10 A. The cord reaches its limit at 15 A, so equipment requiring 20 A circuits must use 12 AWG cable instead. The 300 V insulation rating covers standard rack voltages.

Highlights

  • Extends C14/C13 reach between PDU, UPS or server and existing cord without an adapter
  • Heavy-duty 14 AWG copper rated 15A/250V with SJT jacket for server and rack loads
  • IEC 60320 connectors standard on servers, switches and AV gear for direct compatibility
  • Green jacket enables quick circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance

Specifications

BrandGENERIC
ColorGreen
Length41" - 4 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

My rack PDU only has C13 outlets — will the male C14 plug on this cord fit into them?

No — the male C14 plug is designed for a C13 inlet on a PDU, UPS or server power supply, not for a C13 outlet.

I plan to keep my existing 18 AWG C13 cord on the server side — is the 14 AWG rating of this extension a problem?

The extension is rated for up to 15 A, so it will not limit the 10 A capacity of your 18 AWG cord; the overall circuit remains limited by the thinner cord.

After I connect the green cord between the PDU and my server, how can I confirm the circuit is live and the ground is intact?

Verify that the server powers on normally and use a receptacle tester on the female C13 end to confirm hot, neutral and ground continuity.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.