We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 4ft IEC C14 to C13 14 AWG 15A 250V Blue computer power extension cord

SKU CH-PPBV-JC0JD

A heavy-duty 14 AWG extension cable adds four feet of reach between a C14 inlet and a C13 plug, rated 15 A at 250 V with a blue SJT jacket for easy rack identification

  • TypeExtension Cable
  • ColorBlue
  • Length4 ft.
  • Terminal GenderMale to Female
  • Wire Gauge14 AWG

Length 4ft

Color Blue

  • Adds 4 ft of reach to C14/C13 power links without adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
  • SJT jacket rated 105 °C / 300 V withstands data-centre heat
  • Blue colour simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Extends C14-to-C13 power reach

This four-foot extension cord bridges the gap between a rack PDU, UPS or server inlet and an existing C13 power cord. The male IEC 60320 C14 plug connects to the source while the female C13 socket accepts the equipment cord, removing the need for a separate adapter. The blue SJT jacket allows quick visual tracing of circuits and phases inside a cabinet. It is built for new installations that need a little extra length without changing the connector standard.

Replaces shorter or thinner cords

A 14 AWG conductor rated at 15A and 250V upgrades from 18 AWG cords limited to 10A or 16 AWG cords limited to 13A. The heavier copper handles sustained server and PDU loads where lighter cables would overheat. The jump is worth it whenever the connected equipment draws more than 13A or when the run must stay cool inside a densely populated rack. It is not for builders who need a 20A circuit, which requires 12 AWG cable instead.

Limited by IEC 60320 C13 rating

The C13 socket caps continuous current at 15A even though the 14 AWG wire and SJT insulation are rated for higher temperatures up to 105C and 300V. UL and CSA certification (file E210037) confirms the assembly meets the connector standard, not a higher one. RoHS compliance covers material restrictions only. The cord cannot deliver more than the C13 interface allows, so it does not suit 20A rack feeds or non-IEC power distributions.

Highlights

  • Adds 4 ft of reach to C14/C13 power links without adapters
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for server loads
  • SJT jacket rated 105 °C / 300 V withstands data-centre heat
  • Blue colour simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

TypeExtension Cable
ColorBlue
Length4 ft.
Terminal GenderMale to Female
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What clearance does the 4 ft blue SJT jacket need behind a rack PDU?

The 4 ft length adds reach between the PDU and your existing cord; the SJT jacket is flexible for tight routing behind 14 AWG conductors.

How do I connect the male C14 plug and female C13 socket without reversing them?

Insert the male C14 into the PDU or UPS outlet first, then plug your device cord into the female C13 — reversing them breaks the grounded path.

When should I replace this 14 AWG 15A 250V extension cord?

Replace it if the blue jacket shows cuts, the C14 or C13 pins feel loose, or the cord exceeds its 105C temperature rating during use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.