We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 2 ft IEC C14 to C13 14 AWG 15A 250V Yellow Power Extension Cord

SKU CH-MCV7-J7T5N

A 2 ft yellow 14 AWG IEC C14-to-C13 extension cord rated 15A/250V for server and PDU power connections

  • ColorYellow
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge14 AWG

Length 2ft

Color Yellow

  • Extends C14-to-C13 reach between PDU, UPS or server and existing cord
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for rack loads
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Yellow SJT jacket enables quick circuit and phase identification in racks
  • IEC 60320 connectors fit standard server, switch and AV equipment

Rack power reach

This 2 ft yellow extension adds length between a C14 inlet on a PDU or UPS and your existing C13 cord. The male C14 plug and female C13 socket follow the IEC 60320 standard used across servers, switches and AV gear. No adapter is required to bridge the gap.

Heavy duty gauge and safety

The 14 AWG SJT jacket carries three grounded copper conductors rated for 15A at 250V with a 105C / 300V cable rating. UL Listed and CSA certified under file E210037, the cord also meets RoHS requirements for restricted substances. The yellow jacket helps identify circuits and phases at a glance.

Current and length limits

At 14 AWG the cord supports up to 15A, so equipment drawing more than that will need a thicker cable such as 12 AWG. The fixed 2 ft length cannot be adjusted, and the C13 socket only mates with a matching C14 plug. Builders needing longer runs or higher amperage must choose a different cord.

Highlights

  • Extends C14-to-C13 reach between PDU, UPS or server and existing cord
  • Heavy-duty 14 AWG copper handles 15 A at 250 V for rack loads
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Yellow SJT jacket enables quick circuit and phase identification in racks
  • IEC 60320 connectors fit standard server, switch and AV equipment

Specifications

BrandGENERIC
ColorYellow
Length21" - 25"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 14 AWG conductors or C13/C14 connectors need periodic replacement under normal rack use?

The cord is built with 14 AWG copper and SJT jacket rated for 105C and 300V, so no scheduled conductor or connector replacement is required.

What is the first limit reached when the cord runs at full 15 A continuously?

The 15 A / 250 V rating is the design ceiling; the 14 AWG copper and 105C jacket are sized to that limit without a lower thermal bottleneck.

Does the yellow SJT jacket add noticeable heat or audible noise during all-day operation?

The passive cable generates no noise and the SJT insulation remains within its 105C rating at the rated 15 A load, so heat rise is minimal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.