We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 6 ft C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 6ft C14 to C13 14 AWG 15A 250V White computer power extension cord

SKU CH-9QWJ-YD3BS

A 6 ft heavy-duty 14 AWG extension cord with IEC C14 male to C13 female connectors, rated 15A at 250V and UL listed for server rack power distribution

  • ColorWhite
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 6ft

Color White

  • Extends C14 to C13 power reach by six feet
  • Heavy duty 14 AWG copper handles 15A at 250V
  • SJT jacket rated 105C and 300V for rack duty
  • UL Listed and CSA certified file E210037 plus RoHS
  • White jacket simplifies circuit tracing in dense racks

Extending C14 to C13 Reach

This white IEC 60320 C14-to-C13 extension cord adds length between a rack PDU, UPS or server and an existing power cord. The male C14 plug inserts into the power source while the female C13 socket accepts the equipment cord. It is built for data-centre and server-room installations where standard cables fall short.

14 AWG Replaces Thinner Gauges

The 14 AWG construction supports 15 A at 250 V, stepping up from 18 AWG at 10 A and 16 AWG at 13 A for higher-draw rack gear. The jump is worth it when equipment demand exceeds the capacity of lighter cords or when voltage drop over distance becomes a concern. It is not for 20 A circuits that require 12 AWG.

Sustained Load With SJT Jacket

The SJT-jacketed three-conductor copper cable carries a 105 °C temperature rating and a 300 V cable rating for continuous operation in warm rack aisles. UL Listing and CSA certification (file E210037) confirm compliance for steady-state server and networking loads rather than brief peaks. RoHS compliance removes restricted substances from the assembly.

Highlights

  • Extends C14 to C13 power reach by six feet
  • Heavy duty 14 AWG copper handles 15A at 250V
  • SJT jacket rated 105C and 300V for rack duty
  • UL Listed and CSA certified file E210037 plus RoHS
  • White jacket simplifies circuit tracing in dense racks

Specifications

BrandGENERIC
ColorWhite
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much clearance do the C14 plug and C13 socket need behind a rack PDU?

The male C14 plug and female C13 socket follow the IEC 60320 standard, so they fit any rack PDU or UPS port spaced for that connector without extra clearance.

Which end connects to the power source and which end takes my existing cord during installation?

Plug the male C14 end into the PDU, UPS or wall outlet first, then insert your device cord into the female C13 end; reversing them leaves the live pins exposed.

When should I replace the cord based on its 14 AWG rating and jacket temperature limit?

Replace it if the white SJT jacket shows cracking, discoloration or heat damage, since the 105 °C rating and 15 A / 250 V capacity can degrade after prolonged high-load use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.