We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 4 ft IEC C20 to C19 power extension cord with 12 AWG jacket

Cable Leader

Cable Leader 4 ft IEC C20 to C19 12 AWG 20A/250V Green Power Extension Cord

SKU CH-6CFR-R55B3

A green 4 ft IEC C20 to C19 extension cord with 12 AWG copper rated 20A/250V for server rack and PDU power connections

  • ColorGreen
  • Length41" - 4 ft.
  • Connector Number2
  • Wire Gauge12 AWG

Length 4ft

Color Green

  • Extends C20/C19 power reach without extra adapters
  • Heavy-duty 12 AWG copper handles 20 A at 250 V
  • Green jacket enables quick circuit and phase tracing
  • UL Listed and CSA certified for verified safety
  • IEC 60320 connectors fit standard rack PDU and server gear

4 ft C20-to-C19 extension cord

This four-foot cord adds reach between a rack PDU, UPS or server and your existing C19-ended cable. A male IEC 60320 C20 plug connects to the power source; a female C19 socket accepts the device cord. Heavy-duty 12 AWG, three-conductor copper with an SJT jacket is rated for 20A at 250V and 105C/300V cable rating. The green jacket helps identify circuits at a glance.

Suits 20A rack and PDU runs.

Builders wiring 20A server, switch or AV gear in a rack gain the correct gauge and certified safety. Installations limited to 10A, 13A or 15A loads can use lighter 18 AWG, 16 AWG or 14 AWG cords instead. Buyers needing a different length, colour or connector type should select another cable.

12 AWG gauge decides fit

The 12 AWG conductor is the single specification that determines whether this cord matches your 20A equipment. If your gear draws up to 20A, this gauge is appropriate; if the load is lower, a thinner gauge will suffice. Always verify the required amp rating before purchasing.

Highlights

  • Extends C20/C19 power reach without extra adapters
  • Heavy-duty 12 AWG copper handles 20 A at 250 V
  • Green jacket enables quick circuit and phase tracing
  • UL Listed and CSA certified for verified safety
  • IEC 60320 connectors fit standard rack PDU and server gear

Specifications

BrandGENERIC
ColorGreen
Length41" - 4 ft.
Connector Number2
Wire Gauge12 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the male C20 plug connect to for power?

The male C20 plug connects to a rack PDU, UPS or other C19 power source to supply the cord.

Will the 12 AWG cable support older 18 AWG cords in the same circuit?

Yes, the 12 AWG cord is rated for 20A and safely carries the lower 10A load of 18 AWG cords downstream.

How can I verify the cord is working after installation?

Confirm the green jacket is intact, the C19 socket locks securely, and connected equipment powers on without interruption.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.