We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 5 ft power extension cord with C14 male plug and C13 female socket

Cable Leader

Cable Leader 5ft IEC C14 to C13 Power Extension Cord 18 AWG 10A 250V Red

SKU CH-D0KT-YVZMT

Red 5 ft IEC C14 to C13 extension cord, 18 AWG, 10 A / 250 V, UL Listed and CSA certified for rack PDU and server power

  • ColorRed
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 5ft

Color Red

  • Extends C14/C13 power reach without an adapter
  • 18 AWG copper rated 10A/250V with SJT 105C/300V jacket
  • IEC 60320 connectors fit servers, switches and AV gear
  • Red jacket enables quick circuit tracing in racks
  • UL Listed, CSA certified (E210037) and RoHS compliant

Power Extension for Rack PDUs

This 5 ft red extension cord adds reach between a rack PDU, UPS or server power source and your existing C13 cord. The male IEC 60320 C14 plug connects directly to the power source while the female C13 socket accepts standard equipment cables. It is built for data-centre and server-room environments where extra length is needed without changing the connector type.

Build Integration and Circuit Tracing

The cord uses 18 AWG three-conductor copper with an SJT jacket rated for 105C and 300V, supporting 10A at 250V for typical server, switch and AV loads. Its red jacket allows quick visual identification of circuits or phases inside a crowded rack. UL and CSA certification (file E210037) plus RoHS compliance confirm it meets recognised safety standards for permanent installation.

Sustained Load Behaviour

Under continuous operation the 18 AWG conductors and 105C-rated jacket maintain their electrical and thermal margins at the full 10A rating. The grounded three-wire construction and certified connector mouldings resist heat buildup during long duty cycles in enclosed rack cabinets. It is not intended for loads above 10A; equipment requiring 13A, 15A or 20A needs a heavier gauge cord.

Highlights

  • Extends C14/C13 power reach without an adapter
  • 18 AWG copper rated 10A/250V with SJT 105C/300V jacket
  • IEC 60320 connectors fit servers, switches and AV gear
  • Red jacket enables quick circuit tracing in racks
  • UL Listed, CSA certified (E210037) and RoHS compliant

Specifications

BrandGENERIC
ColorRed
Length5 - 10 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is the maximum continuous current the 18 AWG conductors can carry before overheating?

The cord is rated for 10 A at 250 V; drawing more than 10 A continuously will exceed the 18 AWG limit and cause the SJT jacket to overheat.

How warm does the SJT jacket get and does the cord hum when powering a server rack all day?

The SJT jacket is rated to 105 °C so it stays cool to the touch at normal 10 A loads and the cable has no moving parts, making it completely silent.

Which existing cord must I already have for the female C13 socket to accept it?

You need a standard IEC 60320 C13 plug on your device or power cord; the female C13 socket on this extension mates directly with that plug.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.