We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 2 ft IEC C20 to C19 power extension cord with SJT jacket

Cable Leader

Cable Leader 2ft IEC C20 to C19 12 AWG 20A 250V Yellow Power Extension Cord

SKU CH-J629-6ZZP0

A 2 ft yellow IEC C20-to-C19 extension cord rated 12 AWG, 20 A / 250 V, SJT jacketed, UL Listed and CSA certified for rack PDU and server power connections

  • ColorYellow
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge12 AWG

Length 2ft

Color Yellow

  • Adds reach between PDU and server with male C20 to female C19
  • Heavy-duty 12 AWG copper handles 20A at 250V
  • SJT jacket rated 105C and 300V for rack environments
  • Yellow colour simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Rack power extension for C20/C19 links

The yellow cable extends the reach between a rack PDU, UPS or server and an existing C19-terminated cord. A male IEC 60320 C20 plug connects to the power source while the female C19 socket accepts the equipment cord. Heavy duty 12 AWG copper conductors carry up to 20A at 250V.

Verify connector gender and current rating

Ensure the power source presents a C20 inlet and the device cord ends in a C19 plug so the male-to-female orientation matches. Confirm the circuit does not exceed the 20A rating of the 12 AWG SJT jacketed cable. The 105C / 300V cable rating suits typical data-centre environments.

Yellow jacket aids circuit tracing

The distinct colour lets technicians identify phases or redundant feeds at a glance during rack maintenance. UL Listed and CSA certified construction (file E210037) with RoHS compliance meets common safety requirements for permanent installation. Lifetime replacement backing from the US-based brand covers the cord itself.

Highlights

  • Adds reach between PDU and server with male C20 to female C19
  • Heavy-duty 12 AWG copper handles 20A at 250V
  • SJT jacket rated 105C and 300V for rack environments
  • Yellow colour simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorYellow
Length21" - 25"
Connector Number2
Wire Gauge12 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box and do I need a separate power cord?

The box contains the yellow 2 ft C20-to-C19 extension cord only. Your existing C19-equipped power cord plugs into the female end, so no extra cord is required unless you are replacing that cord as well.

When should I choose the 12 AWG version instead of 14 AWG or 16 AWG?

Choose the 12 AWG cord when the connected equipment draws up to 20 A. The 14 AWG gauge is rated for 15 A and 16 AWG for 13 A, so 12 AWG is the correct match for full 20 A PDU or UPS circuits.

What does the 20 A / 250 V rating mean once the cord is installed in my rack?

It means the cord can continuously carry a 20 A load at up to 250 V through its 12 AWG copper conductors and SJT jacket rated to 105 °C, matching the full capacity of a standard 20 A C20/C19 PDU branch.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.