We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Cable Leader

Cable Leader 2ft IEC C20 to C19 12 AWG 20A 250V White

SKU CH-ARSP-B89A7

A 2 ft white SJT extension cord with a C20 plug and C19 socket, 12 AWG copper rated 20 A at 250 V, UL Listed and CSA certified

  • ColorWhite
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge12 AWG

Length 2ft

Color White

  • Extends C20/C19 power reach without adapters
  • Heavy-duty 12 AWG copper rated 20A / 250V
  • UL Listed and CSA certified for safety
  • White jacket simplifies rack circuit identification
  • Lifetime warranty backed by US-based support

IEC C20 to C19 Extension

This 2 ft white cord extends an existing IEC 60320 C20-to-C19 power link between a rack PDU, UPS or server and the device cable. It is built for data-centre and server-room installs that need a short, heavy-duty jumper rather than a long run. The male C20 plug and female C19 socket maintain the same connector standard throughout the chain.

12 AWG SJT 20A 250V Build

Three-conductor grounded copper at 12 AWG carries up to 20 A at 250 V inside an SJT jacket rated 105 C and 300 V. The gauge matches 20 A branch circuits without stepping down to 14 AWG or 16 AWG, so the cord does not become the limiting factor on high-draw equipment. White jacket colour lets technicians trace circuits and phases visually in dense racks.

UL Listed CSA Certified

UL listing and CSA certification (file E210037) plus RoHS compliance mean the assembly meets North American safety requirements for permanent rack wiring. The certifications cover the complete cord set, not just the cable stock, so inspectors see a single approved part number. Lifetime replacement backing from the US-based brand removes the need to stock spare jumpers for warranty swaps.

Highlights

  • Extends C20/C19 power reach without adapters
  • Heavy-duty 12 AWG copper rated 20A / 250V
  • UL Listed and CSA certified for safety
  • White jacket simplifies rack circuit identification
  • Lifetime warranty backed by US-based support

Specifications

BrandGENERIC
ColorWhite
Length21" - 25"
Connector Number2
Wire Gauge12 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What is the maximum continuous current the 12 AWG conductors can carry without overheating?

The cord is rated for 20 A at 250 V, so the 12 AWG copper conductors are designed to carry up to 20 A continuously within the 105 °C jacket rating.

How warm does the SJT jacket get when the cord runs at full load all day?

The SJT jacket is rated to 105 °C, so under a full 20 A load the cable temperature will stay within that limit; the white jacket also makes it easy to spot any abnormal heating during visual checks.

Which devices must already have IEC 60320 C20 inlets or C19 outlets for this cord to connect?

You need a power source with a C20 inlet — such as a rack PDU or UPS — and an existing cable or device with a C19 plug, because this cord provides a male C20 on one end and a female C19 on the other.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.