We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 4 ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 4ft IEC C14 to C13 Power Extension Cord 18 AWG Yellow

SKU CH-T047-T3HM2

A 4 ft yellow extension cord adds reach between C14 and C13 connectors using 18 AWG, 10 A, 250 V SJT cable with UL and CSA certification

  • ColorYellow
  • Length41" - 4 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 4ft

Color Yellow

  • Extends C14/C13 power connections by four feet
  • 18 AWG copper handles 10 A at 250 V
  • UL Listed and CSA certified for safety
  • Yellow jacket simplifies rack circuit identification
  • Standard IEC 60320 connectors fit PDUs, UPS units and servers

4 ft C14-to-C13 extension for rack power

This yellow 41 inch cord adds reach between a rack PDU, UPS or server and your existing C13 power cord. It uses a male IEC 60320 C14 plug on one end and a female C13 socket on the other. The 18 AWG SJT cable carries three grounded copper conductors rated for 10A at 250V. It is UL Listed and CSA certified under file E210037.

Practical limits of the 18 AWG 10A rating

The cord handles up to 10 amps for light electronics and is rated for 105C and 300V on the cable jacket. Heavier server or PDU loads that draw 13A, 15A or 20A require 16 AWG, 14 AWG or 12 AWG cable respectively. This extension does not increase the ampacity of the circuit it connects to.

Check your rack and device connectors before

Verify that your power source presents a C14 inlet and that your equipment uses a C13 plug. Ensure the 41 inch length is sufficient for the cable run without strain. Confirm the yellow jacket fits your colour-coding scheme for phase or circuit identification. This cord is not suitable for devices that need a higher gauge or a different connector type.

Highlights

  • Extends C14/C13 power connections by four feet
  • 18 AWG copper handles 10 A at 250 V
  • UL Listed and CSA certified for safety
  • Yellow jacket simplifies rack circuit identification
  • Standard IEC 60320 connectors fit PDUs, UPS units and servers

Specifications

BrandGENERIC
ColorYellow
Length41" - 4 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 18 AWG yellow cord or a thicker gauge for my rack?

The 18 AWG yellow cord is rated 10A at 250V, suitable for light electronics; 16 AWG handles up to 13A, 14 AWG up to 15A, and 12 AWG up to 20A for heavier loads.

What does the 10A / 250V rating mean when the cord is powering a server in a rack?

It means the 18 AWG SJT cable safely delivers up to 10 amps at 250 volts for typical server, switch or AV gear loads within its 105°C / 300V cable rating.

How does the IEC 60320 C14-to-C13 interface limit what I can connect?

The standard C14 plug and C13 socket are the universal rack and PDU connection, so the cord works with any server, switch or AV gear using that IEC 60320 pair.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.