We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White five-foot IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 5 ft C14 to C13 Power Extension Cord 18 AWG 10A 250V White

SKU CH-44J8-78VCQ

A 5 ft white IEC C14-to-C13 extension cord rated 18 AWG, 10 A / 250 V with SJT jacket, UL Listed and CSA certified for rack PDU or UPS use

  • ColorWhite
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 5ft

Color White

  • Adds 5 ft reach between PDU and server with male C14 to female C13 connectors
  • 18 AWG copper handles 10A at 250V for rack and data-centre loads
  • SJT jacket rated 105C and 300V withstands demanding server environments
  • White jacket enables quick circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance

Extend C14/C13 Power Reach

This 5 ft white extension cord adds length between a rack PDU, UPS or server and your existing C13 power cord. The male C14 plug connects to the power source while the female C13 socket accepts standard equipment cables. It uses 18 AWG SJT-jacketed copper rated for 10A at 250V and carries UL and CSA certification.

Replaces Short Factory Cables

The cord upgrades installations where stock cables fall short of the PDU or UPS outlet. It is worth adding when you need extra reach to route power neatly inside a rack or cabinet. The 18 AWG gauge handles up to 10A, making it suitable for light electronics rather than higher-draw servers that would require 16 AWG or heavier conductors.

Check Connector Types and Load

Verify that your power source provides a C14 inlet and your equipment uses a C13 plug before ordering. Confirm the connected devices draw no more than 10A so the 18 AWG rating remains appropriate. The white jacket helps identify circuits visually, but ensure the length matches your routing path without excess slack.

Highlights

  • Adds 5 ft reach between PDU and server with male C14 to female C13 connectors
  • 18 AWG copper handles 10A at 250V for rack and data-centre loads
  • SJT jacket rated 105C and 300V withstands demanding server environments
  • White jacket enables quick circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety assurance

Specifications

BrandGENERIC
ColorWhite
Length5 - 10 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors does the 5 ft cord use to link a PDU or UPS to existing equipment?

It has a male IEC 60320 C14 plug on one end and a female C13 socket on the other, so it plugs directly into a rack PDU or UPS outlet and accepts your current C13 power cord.

How do I install the extension without creating a loose connection at the rack?

Push the C14 plug fully into the PDU or UPS outlet until the latch clicks, then seat the existing C13 cord firmly into the female end; the step often missed is verifying both latches are engaged before routing the cable.

When should I replace this white SJT-jacketed cord in a 105°C rated environment?

Inspect the jacket and pins during routine rack maintenance; replace the cord if the white insulation shows cracking, discoloration from heat, or if the C14/C13 latches no longer hold securely.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.