We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 5 ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 5 ft IEC C14 to C13 Power Extension Cord 18 AWG 10A 250V Blue

SKU CH-F65Y-E0ZPK

A 5 ft blue IEC C14-to-C13 extension cord rated 18 AWG, 10 A / 250 V with UL and CSA certification for rack PDU or UPS use

  • ColorBlue
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge18 AWG

Length 5ft

Color Blue

  • Extends C14/C13 power connections without extra adapters
  • 18 AWG copper handles 10A at 250V for rack loads
  • UL Listed and CSA certified (file E210037) for safety compliance
  • Blue SJT jacket enables quick circuit tracing in dense racks
  • 5 ft length adds flexible reach between PDU and equipment

IEC C14 to C13 Extension Cord

The Cable Leader 5 ft extension cord adds reach between a rack PDU, UPS or server and an existing C13 power cord. It uses a male C14 plug on one end and a female C13 socket on the other so no adapter is required. The blue SJT jacket helps identify circuits at a glance.

Suited for Rack Builders and Data Center Technicians

It suits technicians who need to extend a C14/C13 link inside a cabinet and want a UL Listed, CSA certified cable with a colour-coded jacket. It is not suited for installers who need a higher ampacity gauge than 18 AWG or a different connector pairing.

18 AWG 10A 250V Rating

The single specification that decides fit is the 18 AWG, 10A / 250V rating. This gauge handles light electronics and typical rack loads up to 10 amps; equipment drawing more current requires a heavier cable.

Highlights

  • Extends C14/C13 power connections without extra adapters
  • 18 AWG copper handles 10A at 250V for rack loads
  • UL Listed and CSA certified (file E210037) for safety compliance
  • Blue SJT jacket enables quick circuit tracing in dense racks
  • 5 ft length adds flexible reach between PDU and equipment

Specifications

BrandGENERIC
ColorBlue
Length5 - 10 ft.
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 18 AWG, 10A cord handle the same load as my existing 14 AWG server cable?

The 18 AWG cord is rated for 10A; your 14 AWG cable handles up to 15A, so the extension becomes the limiting factor — keep total draw at or below 10A.

How can I confirm the cord is seated correctly on the C14 and C13 ends?

Push each connector until the latch clicks and the blue jacket sits flush; the UL/CSA markings on the cable should face outward for quick visual verification.

Does the package include a C13-to-wall cord or only the C14-to-C13 jumper?

Only the 5 ft blue C14-to-C13 extension is supplied; you must provide the C13-to-wall cord and any PDU or UPS with C14 outlets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.