We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 3 ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 3 ft IEC C14 to C13 Power Extension Cord 18 AWG White

SKU CH-064A-154PK

A 3 ft white IEC C14-to-C13 extension cord rated 10 A / 250 V with 18 AWG SJT copper, UL Listed and CSA certified for rack PDU and server use

  • ColorWhite
  • Length36" - 40"
  • Connector Number2
  • Wire Gauge18 AWG

Length 3ft

Color White

  • Extends C14 to C13 power connections by 3 ft without adapters
  • 18 AWG copper handles 10 A at 250 V for rack loads
  • SJT jacket rated 105 °C and 300 V for data-centre safety
  • UL Listed and CSA certified (file E210037) plus RoHS compliant
  • White jacket colour-codes circuits for quick rack identification

Extends C14 to C13 Power Connections

This white 3 ft extension cord adds reach between a rack PDU, UPS or server and your existing C13 power cord. It uses a male IEC 60320 C14 plug on one end and a matching female C13 socket on the other so no adapter is required. The 18 AWG SJT jacketed cable contains three grounded copper conductors rated for 10A at 250V. UL Listed and CSA certified with RoHS compliance.

Sustained Load Rating and Temperature

The cord is built with an 18 AWG SJT jacket rated to 105C and a 300V cable rating for continuous operation in server racks and data centres. At 10A the 18 AWG conductors remain within specification for light electronics and standard server loads. The white jacket helps trace circuits and phases at a glance during maintenance.

Check Gauge and Connector Compatibility

Verify that your equipment draws no more than 10A so the 18 AWG rating is sufficient; higher-draw gear needs 16 AWG for 13A, 14 AWG for 15A or 12 AWG for 20A. Confirm the power source provides a C14 inlet and your device uses a C13 plug. Ensure the 3 ft length covers the distance between your PDU or UPS and the equipment without strain.

Highlights

  • Extends C14 to C13 power connections by 3 ft without adapters
  • 18 AWG copper handles 10 A at 250 V for rack loads
  • SJT jacket rated 105 °C and 300 V for data-centre safety
  • UL Listed and CSA certified (file E210037) plus RoHS compliant
  • White jacket colour-codes circuits for quick rack identification

Specifications

BrandGENERIC
ColorWhite
Length36" - 40"
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 18 AWG cord get warm when it carries 10 A continuously all day?

The SJT jacket is rated to 105 °C, so the cord stays within safe temperature limits at its full 10 A / 250 V rating.

What must I already have to use this white 3 ft extension?

You need a C14 outlet on your PDU or UPS and a C13 plug on the device cord you want to extend.

Will the C14 plug fit the older IEC 60320 inlets on my legacy servers?

Yes — the male C14 and female C13 connectors follow the IEC 60320 standard used across generations of rack gear.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.