We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 2 ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 2ft IEC C14 to C13 Power Extension Cord 18 AWG 10A 250V Yellow

SKU CH-31GM-924V7

A 2 ft yellow IEC C14-to-C13 extension cord rated 18 AWG, 10 A / 250 V with UL and CSA certification for rack PDU or UPS use

  • ColorYellow
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge18 AWG

Length 2ft

Color Yellow

  • Extends C14-to-C13 reach between PDU and device without extra adapters
  • 18 AWG SJT cable rated 10A at 250V for server and rack loads
  • Yellow jacket enables quick visual circuit and phase tracing in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety
  • IEC 60320 C14 male to C13 female connectors fit standard rack and PDU ports

IEC C14-to-C13 rack extension cord

This yellow 2 ft cord adds reach between a rack PDU, UPS or server and your existing C13 power cable. The male C14 plug inserts into the power source while the female C13 socket accepts the equipment cord, so no adapter is required. It is built for standard IEC 60320 rack and data-centre connections.

18 AWG SJT jacket with UL and CSA listing

Three-conductor grounded copper is rated 10A at 250V with a 105C / 300V cable rating for continuous rack loads. The yellow SJT jacket lets you colour-code circuits and phases at a glance. Safety certifications include UL Listed, CSA file E210037 and RoHS compliance.

Check your equipment draw and outlet type

Verify that the connected device draws no more than 10A so the 18 AWG gauge remains within its rating. Confirm the power source presents a C14 inlet and your equipment cord terminates in a C13 plug. This cord does not convert voltage or change connector gender beyond the stated C14-to-C13 extension.

Highlights

  • Extends C14-to-C13 reach between PDU and device without extra adapters
  • 18 AWG SJT cable rated 10A at 250V for server and rack loads
  • Yellow jacket enables quick visual circuit and phase tracing in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for safety
  • IEC 60320 C14 male to C13 female connectors fit standard rack and PDU ports

Specifications

BrandGENERIC
ColorYellow
Length21" - 25"
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What current does the IEC 60320 C14 to C13 cord support at 250 V?

The 18 AWG SJT cable is rated for 10 A at 250 V with a 105 °C / 300 V insulation rating, matching typical rack PDU and server loads.

What clearance does the 2 ft yellow extension need in a rack?

The cord is 21–25 in long with standard C14 male and C13 female ends; it fits between adjacent PDU outlets or UPS ports without blocking neighbouring sockets.

How do I connect the extension without reversing the feed?

Plug the male C14 end into the PDU or UPS outlet first, then insert your device cord into the female C13 socket — reversing them leaves the equipment unpowered.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.