We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 2 ft IEC C14 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 2ft IEC C14 to C13 Power Extension Cord 18 AWG 10A 250V White

SKU CH-3P7A-4NMZ8

Adds reach between a C14 outlet and a C13 cord using 18 AWG, 10 A, 250 V SJT cable with UL and CSA certification

  • ColorWhite
  • Length21" - 25"
  • Connector Number2
  • Wire Gauge18 AWG

Length 2ft

Color White

  • Adds reach to C14/C13 power connections without adapters
  • 18 AWG SJT copper handles 10A at 250V for rack loads
  • IEC 60320 connectors fit standard PDU, UPS and server gear
  • White jacket enables quick circuit and phase identification
  • UL Listed and CSA certified (file E210037), RoHS compliant

Extending rack power connections

This IEC 60320 C14 to C13 extension cord adds reach between a rack PDU, UPS or server and your existing power cord. The male C14 plug connects to the power source while the female C13 socket accepts standard equipment cables. It is suited for data-centre, server-room and AV rack installations where extra length is needed.

Certified cable construction

The cord uses 18 AWG three-conductor copper with an SJT jacket rated for 105C and 300V, supporting 10A at 250V. It carries UL Listing and CSA certification under file E210037 and meets RoHS requirements. The white jacket assists with circuit and phase identification in dense racks.

Build integration and limits

The two-foot length bridges short gaps without adding bulk, and the standard C14/C13 connectors fit existing PDU ports and equipment cords directly. It is rated for 10A loads, so equipment drawing higher current will require a heavier-gauge cord such as 16 AWG for 13A, 14 AWG for 15A or 12 AWG for 20A applications.

Highlights

  • Adds reach to C14/C13 power connections without adapters
  • 18 AWG SJT copper handles 10A at 250V for rack loads
  • IEC 60320 connectors fit standard PDU, UPS and server gear
  • White jacket enables quick circuit and phase identification
  • UL Listed and CSA certified (file E210037), RoHS compliant

Specifications

BrandGENERIC
ColorWhite
Length21" - 25"
Connector Number2
Wire Gauge18 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the C14-to-C13 extension between my PDU and server without an adapter?

Plug the male IEC 60320 C14 end into the PDU or UPS outlet, then insert your equipment's existing C13 cord into the female C13 socket; the 2 ft white SJT cord adds reach with no adapter required.

Will the 18 AWG copper conductors or SJT jacket need replacement under normal rack temperatures?

The 18 AWG 3-conductor copper cable is rated 105 °C and 300 V, so it handles typical rack heat without degradation; no scheduled replacement is needed unless the jacket is physically damaged.

At what sustained load will the 10 A rating become the limiting factor?

The cord is UL Listed and CSA certified (file E210037) for 10 A at 250 V; drawing more than 10 A continuously will hit the ampacity limit before the 105 °C temperature rating becomes an issue.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.