We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular RFID card reader with textured ABS+PC finish, red and green LED indicators, IP65 rated for outdoor use

ZKTECO

ZKTECO KR602M+IC RFID card reader office equipment

SKU CH-A9Y3-NDAVN

RFID card reader for access control reads ID and M1 cards at up to 10 cm with Wiegand 26/34-bit output, IP65-rated ABS+PC housing, and -20 °C to +65 °C operating range

Models: Select KR602M+IC

  • Reads cards up to 10 cm distance for quick entry
  • Wiegand 26/34-bit output fits most controllers
  • IP65 rating withstands outdoor dust and rain
  • Operates from -20 °C to +65 °C reliably
  • Dual-colour LEDs plus beeper confirm every read

Access Control Reader for ID and M1 Cards

The KR600 series reader uses an advanced RF circuit and embedded microcontroller with efficient decoding to read ID cards or M1 cards. It offers high receiving sensitivity, low working current and fast card reading speed for access control, attendance and other RFID applications. The unit operates on a single DC power supply and carries an IP65 rating for outdoor use.

Wiegand Output and Environmental Limits

Data is delivered through a 26 or 34 bit Wiegand output format with a read range up to 10 centimetres. The reader accepts a DC supply from 9 to 12 volts with a maximum current draw of 70 milliamps. It functions across a temperature span of minus 20 to plus 65 degrees Celsius and humidity from 10 to 90 percent non-condensing.

Power and Mounting Checks Before Ordering

Verify that your access control panel supports 26 or 34 bit Wiegand input and can provide 9 to 12 volts DC at up to 70 milliamps. Confirm the mounting surface suits the 116 by 75 by 17.3 millimetre footprint and that the IP65 rating meets the intended outdoor exposure. Ensure wiring allows for the two input ports used for external LED and buzzer control.

Highlights

  • Reads cards up to 10 cm distance for quick entry
  • Wiegand 26/34-bit output fits most controllers
  • IP65 rating withstands outdoor dust and rain
  • Operates from -20 °C to +65 °C reliably
  • Dual-colour LEDs plus beeper confirm every read

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick the KR601 or the KR602M+IC model?

The KR602M+IC reads both ID and M1 cards, while the KR601 is an ID-only reader, so choose based on which card types your system uses.

What does the 5-10 cm read range mean when the reader is mounted on a door frame?

Users must hold their card within 5 to 10 centimetres of the reader face for a successful read, so mount it at a comfortable height.

How does the 26/34 bit Wiegand output limit what controllers I can connect?

The reader only outputs 26-bit or 34-bit Wiegand data, so the connected controller must accept one of those two formats.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.