Enfain
Enfain 4501-4511 POF cable 1.0 mm core 25 m
25 m single-core plastic optical fibre with 1.0 mm core, 2.2 mm jacket, 0.50 NA, PMMA construction, 650/530 nm operation, >70 N tensile strength and -55 to +85 °C range
- 0 mm core delivers 650 or 530 nm transmission
- PMMA jacket resists wear and corrosion across -55 to +85 °C
- 2 mm finished diameter simplifies routing in tight spaces
- >70 N tensile strength withstands industrial handling
- 25 m length suits long-run medical and control links
1.0 mm Core POF Cable for Industrial Links
This 25 m Enfain plastic optical fiber uses a 1.0 mm PMMA core inside a 2.2 mm black jacket. It transmits at 650 or 530 nm wavelength with a 0.50 numerical aperture. The cable suits industrial control and medical equipment that need electrical isolation.
PMMA Jacket and High Tensile Strength
The PMMA outer skin resists wear and corrosion across a -55 to +85 °C operating range. Tensile strength exceeds 70 N, so the cord withstands pulling during routing. These material properties replace the need for metallic shielding in noisy environments.
Simple Termination with Polished Ends
Precise factory polishing lets the cable connect without field splicing tools or ongoing maintenance. Installers only need compatible 4501-4511 connectors for the 1.0 mm core. The single-fiber design cannot carry duplex traffic, so bidirectional links require two separate runs.
Highlights
- 0 mm core delivers 650 or 530 nm transmission
- PMMA jacket resists wear and corrosion across -55 to +85 °C
- 2 mm finished diameter simplifies routing in tight spaces
- >70 N tensile strength withstands industrial handling
- 25 m length suits long-run medical and control links
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Enfain 4503-4513 fibre optic cable 25m black PMMA 1.0mm core 2.2mm diameter 650/530nm -55 to +85°C
Questions about this item
Will the PMMA jacket on this 1.0 mm core POF cable need periodic replacement or special cleaning?
The manufacturer states no maintenance or repair is required; the PMMA outer layer is wear-resistant and corrosion-resistant for the cable's service life.
What is the first transmission limit reached when running this 25 m POF link continuously at 650 nm?
The cable's numerical aperture is 0.50 and joint loss applies per connection; total attenuation over 25 m will be the practical bandwidth ceiling.
How much heat does the fiber itself generate when carrying data all day between -55 and +85 °C?
Optical fiber is passive and generates no heat; the PMMA cable operates across the full -55 to +85 °C range without active cooling.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








