We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20 m plastic optical fiber patch cord 1.0 mm core 2.2 mm jacket

Enfain

Enfain 4503-4513 POF patch cord 20 m 1.0 mm core 2.2 mm jacket black -55 to +85 °C

SKU CH-S8GQ-CRH4X

Single-core plastic optical fiber patch cord with 1.0 mm core, 2.2 mm black PMMA jacket, operating from -55 to +85 °C at 650 or 530 nm wavelength

Length 20m

  • 0 mm core and 2.2 mm jacket for precise 650 or 530 nm signal transmission
  • PMMA jacket resists wear and corrosion in harsh environments
  • Operates from -55 to +85 °C for extreme temperature stability
  • Tensile strength over 70 N ensures durable, reliable connections
  • Non-conductive fiber immune to electromagnetic interference for clean data transfer

Enfain 4503-4513 POF patch cord 20 m

This single-core plastic optical fiber patch cord measures 20 metres in length with a 1.0 mm core and a 2.2 mm black PMMA jacket. It is built for industrial and medical environments that require stable signal transmission without electromagnetic interference. The cable operates reliably across a temperature range of -55 to +85 °C.

Suited for high-voltage frequency converters

The cord fits applications needing non-conductive links resistant to EMI radiation and harsh temperatures. It is not intended for buyers who require glass fiber bandwidth or connectors compatible with standard telecom polishing gear. Installations demanding ultra-low loss over long distances should look at alternative fiber types.

20 m reach with >70 N tensile strength

The 1.0 mm core and 0.50 numerical aperture support 650 nm or 530 nm wavelengths for short-run industrial links. Headroom exists for vibration-prone cabinets and frequent reconnection thanks to the wear-resistant PMMA sheath. The link runs out when distances exceed the inherent attenuation budget of plastic optical fiber.

Highlights

  • 0 mm core and 2.2 mm jacket for precise 650 or 530 nm signal transmission
  • PMMA jacket resists wear and corrosion in harsh environments
  • Operates from -55 to +85 °C for extreme temperature stability
  • Tensile strength over 70 N ensures durable, reliable connections
  • Non-conductive fiber immune to electromagnetic interference for clean data transfer

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What connectors or equipment are required at each end of this 1.0 mm core POF patch cord?

The cord uses the HFBR 4503-4513Z interface, so each end needs a compatible HFBR connector or transceiver that accepts a 1.0 mm core plastic optical fibre with a 2.2 mm jacket.

Will this 20 m length with 0.50 numerical aperture work reliably alongside legacy 650 nm or 530 nm transceivers?

Yes, the cable is specified for both 650 nm and 530 nm wavelengths and its 0.50 numerical aperture matches standard POF transceivers, so it interoperates with older hardware using those wavelengths.

How can I verify the link is performing correctly after installing the 20 m run?

Measure the received optical power at the far end; a healthy link shows low loss across the 20 m span and the connector should withstand over 70 N of tensile force without signal degradation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.