We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 30m plastic optical fiber cable with 2.2mm PMMA jacket

Enfain

Enfain 4501-4511 Plastic Optical Fiber Cable 30m

SKU CH-WGR3-KPFMV

A 30 metre single-core plastic optical fibre cable with 1.0 mm core, 2.2 mm jacket and 0.50 numerical aperture for 650 or 530 nm links, PMMA construction rated -55 to +85 °C and >70 N tensile strength

Length 30m

  • Large bandwidth for stable signals
  • Resists EMI for clean data transfer
  • Withstands -55 to +85 °C extremes
  • PMMA jacket resists wear and corrosion
  • Simple setup with no maintenance needed

30-metre plastic optical fibre link

The Enfain 4501-4511 is a single-core plastic optical fibre cable measuring 30 metres. It uses a 1.0 mm core and 2.2 mm finished diameter with PMMA construction. The cable operates at 650 or 530 nm wavelengths and suits industrial control, medical and communication links requiring electrical isolation.

Sustained transmission stability

A numerical aperture of .50 supports consistent light coupling over the full length. The specification lists transmission loss without a decibel value, while tensile strength exceeds 70 N. The operating range spans -55 to +85 °C, so the cable maintains performance through extended thermal cycling without degradation.

Straightforward termination and routing

Precise polishing and grinding simplify connector fitting, and the PMMA outer skin resists wear and corrosion during installation. No maintenance or repair is needed once the link is in place. Installers lacking POF termination tools or expecting glass-fibre handling procedures will find the workflow different from their usual practice.

Highlights

  • Large bandwidth for stable signals
  • Resists EMI for clean data transfer
  • Withstands -55 to +85 °C extremes
  • PMMA jacket resists wear and corrosion
  • Simple setup with no maintenance needed

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 4501-4511 cable generate heat or noise when running continuously?

The 4501-4511 is a passive plastic optical fiber with no active components, so it produces no heat or noise during continuous operation.

What connectors or transceivers must I already own to use this 1.0 mm core POF cable?

You need compatible HFBR-4501/4511 series connectors or transceivers that accept a 1.0 mm core and 2.2 mm finished diameter for 650 nm or 530 nm wavelength.

Will this 2.2 mm PMMA fiber work with older 650 nm industrial links I still run?

Yes, the 4501-4511 supports 650 nm and 530 nm wavelengths with a 0.50 numerical aperture, matching legacy industrial POF links.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.