We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 7-foot C20-to-C13 power extension cord with 14 AWG SJT jacket

Cable Leader

Cable Leader IEC C20 to C13 Power Extension Cord 7ft 14 AWG 15A 250V Red

SKU CH-QBE2-SGT4V

Red 14 AWG SJT extension adds 7 ft of reach between a C20 PDU or UPS and a C13 device, rated 15 A / 250 V and UL listed

  • ColorRed
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 7ft

Color Red

  • Extends C20/C13 power reach by 7 ft with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server and rack loads
  • SJT jacket rated 105C and 300V withstands data-centre heat and voltage stress
  • Red jacket enables instant circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for regulated deployments

IEC C20 to C13 extension for rack power

This 7 ft red cord extends the reach between a PDU, UPS or server and an existing C13 cable. The male C20 plug connects to the power source and the female C13 socket accepts your current cord, so no adapter is required. Heavy duty 14 AWG copper with an SJT jacket handles 15 A at 250 V for server and data-centre loads.

Suited for colour-coded rack circuits

The red jacket helps trace circuits and phases at a glance in dense racks. UL Listed and CSA certified (file E210037) with RoHS compliance gives documented safety assurance. It is not for installers who need a different connector pairing or a higher ampacity than 15 A.

14 AWG 15 A 250 V rating decides fit

The 14 AWG conductor and 15 A / 250 V rating determine whether the cord can carry the load of your equipment. If your gear draws more than 15 A you need a larger gauge; if it draws less the cord still works safely.

Highlights

  • Extends C20/C13 power reach by 7 ft with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15A at 250V for server and rack loads
  • SJT jacket rated 105C and 300V withstands data-centre heat and voltage stress
  • Red jacket enables instant circuit and phase identification in dense racks
  • UL Listed and CSA certified (file E210037) plus RoHS compliant for regulated deployments

Specifications

BrandGENERIC
ColorRed
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I connect the C20 male plug to my PDU and which orientation avoids strain?

Insert the male C20 plug fully into the PDU or UPS outlet until the latch clicks; route the SJT jacket so the cable hangs straight down rather than bending sharply at the connector.

When should I replace this 14 AWG extension cord?

Replace it if the red SJT jacket shows cracks, the C13 socket grips loosely, or the grounding pin is bent — any visible damage means the 15A 250V rating can no longer be trusted.

What load limit will I hit first on a fully loaded 15A circuit?

The 14 AWG copper conductors are rated for 15A at 250V; sustained loads above 15A will trip the upstream breaker before the cable itself overheats.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.