We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 4 ft C20 to C13 power extension cord with SJT jacket

Cable Leader

Cable Leader 4 ft C20 to C13 14 AWG 15A 250V Green Computer Power Cord

SKU CH-90CH-93306

A four-foot heavy-duty 14 AWG extension cord with IEC C20 plug and C13 socket, rated 15A at 250V and UL listed for rack PDU and server connections

  • ColorGreen
  • Length41" - 4 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 4ft

Color Green

  • Extends C20-to-C13 reach by four feet with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15 amps at 250 volts for server loads
  • SJT jacket rated 105 °C and 300 volts withstands data-centre heat
  • Green colour codes rack circuits for quick phase identification
  • UL Listed and CSA certified (file 210037) plus RoHS compliant

Reach Extension for C20/C13 Power Links

This 4 ft cord adds length between a male IEC 60320 C20 inlet and a female C13 outlet on a rack PDU, UPS or server. The 14 AWG SJT jacketed copper conductors are rated 15 A at 250 V with a 105 °C / 300 V cable rating. Green insulation helps trace circuits and phases inside a dense rack. UL Listed and CSA certified (file E210037) with RoHS compliance.

Stepping Up from Lighter Gauge Cables

18 AWG cords handle up to 10 A for light electronics, while 16 AWG manages up to 13 A for standard computers. Moving to 14 AWG is worthwhile when the load approaches 15 A, such as on PDU branches or higher-draw server gear. If the equipment draws more than 15 A, a 12 AWG cord rated for 20 A is the appropriate choice instead.

Steady Load Behaviour on Rack Circuits

The SJT jacket and 105 °C temperature rating mean the cord maintains its electrical properties during continuous operation in warm rack aisles. Three-conductor grounded copper keeps voltage drop low over the 41-inch run at full 15 A draw. The UL and CSA certifications confirm the construction meets sustained-load safety standards for data-centre environments.

Highlights

  • Extends C20-to-C13 reach by four feet with male-to-female IEC 60320 connectors
  • Heavy-duty 14 AWG copper handles 15 amps at 250 volts for server loads
  • SJT jacket rated 105 °C and 300 volts withstands data-centre heat
  • Green colour codes rack circuits for quick phase identification
  • UL Listed and CSA certified (file 210037) plus RoHS compliant

Specifications

BrandGENERIC
ColorGreen
Length41" - 4 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What clearance does the IEC 60320 C20 plug and C13 socket need in a 1U rack?

The 41-inch cord with C20 male and C13 female connectors fits standard 1U server-rail depth; allow room for the plug body and cable bend radius behind the PDU.

How do I install the C20-to-C13 extension without creating a loose connection?

Insert the male C20 plug fully into the PDU or UPS outlet until it clicks, then seat the existing C13 cord firmly into the female end; the step most people skip is verifying both connectors are latched.

When should I replace this 14 AWG SJT cord in a 15A 250V server circuit?

Replace if the green SJT jacket shows cracking, the 105°C rating label becomes illegible, or the UL file E210037 certification mark is damaged — any of these indicate the 3-conductor copper may no longer meet 15A safety limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.