We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 5 ft heavy duty power extension cord with male C20 plug and female C13 socket

Cable Leader

Cable Leader 5ft IEC C20 to C13 Heavy Duty Power Extension Cord 14 AWG 15A 250V Red

SKU CH-5NDV-3QQEN

A 5 ft heavy-duty 14 AWG extension cord with a C20 plug and C13 socket rated 15A at 250V, UL listed for rack power distribution

  • ColorRed
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 5ft

Color Red

  • Extends C20/C13 power links without extra adapters
  • Heavy-duty 14 AWG copper handles 15A at 250V
  • UL Listed and CSA certified for safety compliance
  • Red SJT jacket simplifies rack circuit identification
  • Lifetime replacement guarantee from US-based support

Red rack jumper extends C20 to C13

This red 5 ft heavy-duty cord adds reach between a rack PDU, UPS or server and an existing C13 power cord. It uses a male IEC 60320 C20 plug and a female C13 socket so no adapter is needed. The 14 AWG SJT jacket carries three grounded copper conductors rated for 15A at 250V.

Server and data-centre loads only

The 14 AWG gauge suits equipment drawing up to 15A such as servers, switches and PDUs in a rack. It is not for lighter 10A or 13A devices that use thinner cable, nor for 20A gear that requires 12 AWG. The fixed C20 and C13 ends also mean it cannot bridge to other inlet or outlet types.

UL Listed 14 AWG 15A 250V rating

The single specification that decides fit is the 14 AWG conductor rated 15A at 250V with a 105C 300V SJT jacket. This gauge and rating match typical rack PDU and server loads. If your gear needs a different ampacity or connector, this cord will not meet the requirement.

Highlights

  • Extends C20/C13 power links without extra adapters
  • Heavy-duty 14 AWG copper handles 15A at 250V
  • UL Listed and CSA certified for safety compliance
  • Red SJT jacket simplifies rack circuit identification
  • Lifetime replacement guarantee from US-based support

Specifications

BrandGENERIC
ColorRed
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the IEC C20 to C13 cord, and which step is often missed?

Plug the male C20 end into the PDU or UPS outlet first, then seat your existing C13 cord fully into the female socket — the step people skip is verifying the C13 latch clicks, otherwise vibration can unseat it.

What maintenance or replacement will this 14 AWG SJT extension need later?

The cord itself is passive copper with a 105C jacket and requires no scheduled maintenance; replace it only if the red SJT sheath shows cuts, the C20 pins discolour, or the C13 latch stops holding.

What limit appears first when this 15A 250V jumper runs continuously at full load?

The 14 AWG conductor rating of 15 amps at 250 volts is the first ceiling — sustained draw above 15 A will overheat the cable before the UL Listed connectors reach their own thermal limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.