We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green six-foot C20-to-C13 power extension cord with thick SJT jacket

Cable Leader

Cable Leader 6ft C20 to C13 Heavy Duty Extension Cord 14 AWG 15A 250V Green

SKU CH-TKBF-JNPTW

A 6 ft heavy-duty 14 AWG extension cord with a male C20 plug and female C13 socket for PDU or server rack connections, rated 15A/250V and UL listed

  • ColorGreen
  • Length5 - 10 ft.
  • Connector Number2
  • Wire Gauge14 AWG

Length 6ft

Color Green

  • Extends C20-to-C13 power reach without adapters
  • Heavy-duty 14 AWG copper carries 15 A at 250 V
  • SJT jacket rated 105 °C and 300 V for rack loads
  • Green jacket simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Extends C20 to C13 power reach

This six-foot extension cord bridges the gap between a rack PDU, UPS or server inlet and an existing C13 power cord. The male IEC 60320 C20 plug connects to the power source while the female C13 socket accepts the equipment cord. It is built for server, switch and AV rack environments where extra length is needed.

Check connector gender and current rating

Verify that the power source presents a C20 inlet and that the equipment cord terminates in a C13 plug before ordering. The cord is rated 15A at 250V on 14 AWG copper, so confirm the connected load does not exceed this ampacity. The SJT jacket carries a 105C temperature rating and 300V cable rating for the intended installation.

Sustained load on 14 AWG copper

The three-conductor grounded copper conductors and SJT jacket are rated for continuous 15A service at up to 105C conductor temperature. UL Listing and CSA certification (file E210037) confirm compliance for prolonged rack and data-center duty. The green jacket aids circuit identification during long-term operation.

Highlights

  • Extends C20-to-C13 power reach without adapters
  • Heavy-duty 14 AWG copper carries 15 A at 250 V
  • SJT jacket rated 105 °C and 300 V for rack loads
  • Green jacket simplifies circuit tracing in dense racks
  • UL Listed and CSA certified (file E210037) with RoHS compliance

Specifications

BrandGENERIC
ColorGreen
Length5 - 10 ft.
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box and is anything else needed to use it?

The box contains the 6 ft green C20-to-C13 extension cord itself. You will need an existing C13-ended power cord and a C20 outlet on your PDU, UPS or server to complete the connection.

How do I decide between the 14 AWG version shown and the thinner gauges mentioned?

Choose 14 AWG when the load can reach 15 A at 250 V, such as servers or rack PDUs. The supplier notes 18 AWG for up to 10 A, 16 AWG for up to 13 A and 12 AWG for up to 20 A.

What does the 15 A / 250 V rating mean once the cord is installed in a rack?

It means the SJT-jacketed, 14 AWG copper conductors are rated to carry a continuous 15 A at 250 V (105 °C, 300 V cable rating) and are UL Listed and CSA certified (file E210037) for that duty.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.