We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 3 ft heavy-duty power extension cord with male C20 plug and female C13 socket

Cable Leader

Cable Leader 3ft IEC C20 to C13 Heavy Duty Power Extension Cord 14 AWG SJT 15A 250V Red

SKU CH-R4M1-56RXW

A 3 ft heavy-duty 14 AWG SJT extension cord rated 15 A at 250 V with a male C20 plug and female C13 socket, UL Listed and CSA certified for server-rack power distribution

  • ColorRed
  • Length36" - 40"
  • Connector Number2
  • Wire Gauge14 AWG

Length 3ft

Color Red

  • Extends C20-to-C13 reach between PDU, UPS or server and existing cord
  • Heavy-duty 14 AWG SJT copper rated 15A / 250V for server and rack loads
  • Red jacket enables quick circuit and phase identification in the rack
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Lifetime warranty from US-based Cable Leader brand and support

Rack power extension cord

This three-foot IEC C20 to C13 cord extends the reach between a rack PDU, UPS or server and an existing C13 power cord. It is built for data-centre and server-room environments where standard cables fall short. The male C20 plug and female C13 socket follow the IEC 60320 standard used across servers, switches and AV gear. No adapter is required to bridge the connection.

14 AWG capacity and headroom

The 14 AWG, three-conductor copper cable is rated for 15A at 250V, making it suitable for server, PDU and higher-draw equipment loads. An 18 AWG cord handles up to 10A for light electronics, a 16 AWG cord up to 13A for computers, while 12 AWG steps up to 20A for heavy-duty 20A equipment. This cord runs out of headroom beyond 15A continuous draw.

Red SJT jacket and certifications

A red SJT jacket rated to 105C and 300V provides durability and lets technicians trace circuits and phases at a glance. The assembly carries UL Listing and CSA certification under file E210037 and is RoHS compliant. The grounded three-conductor construction and standard IEC connectors mean it fits existing rack infrastructure without modification.

Highlights

  • Extends C20-to-C13 reach between PDU, UPS or server and existing cord
  • Heavy-duty 14 AWG SJT copper rated 15A / 250V for server and rack loads
  • Red jacket enables quick circuit and phase identification in the rack
  • UL Listed and CSA certified (file E210037) with RoHS compliance
  • Lifetime warranty from US-based Cable Leader brand and support

Specifications

BrandGENERIC
ColorRed
Length36" - 40"
Connector Number2
Wire Gauge14 AWG

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the male C20 plug fit the C20 outlets on my existing rack PDU?

Yes — the male IEC 60320 C20 plug is the standard connector used on rack PDUs, UPS units and server power supplies, so it mates directly with your existing C20 outlets.

How can I verify the cord is delivering power correctly after I connect it?

Confirm the red SJT jacket is fully seated at both ends, then check that the connected equipment powers on and runs without tripping the PDU breaker — the UL Listed and CSA certified (file E210037) construction guarantees the 15 A / 250 V rating under load.

Does the package include a C13 power cord for my server, or only the extension itself?

Only the 3 ft C20-to-C13 extension cord is supplied — you must provide your own C13-ended cord to plug into the female socket.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.